6ES7142-3BH00-0XA0 ET200ECO, BM142, 16DO 24V DC/0,5A

0 reviews | Write a review

Product Code: 6ES7142-3BH00-0XA0

Availability: In Stock

Price: $138.71

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7142-3BH00-0XA0

		SIMATIC DP, BASIC MOD. BM142 ET 200ECO: 16 DO DC 24 V/0.5 A, 8 X M12, DOUBLE-ASSIGNEMENT, IP65/67, CONN. BLOCK 6ES7194-3AA00-0.A0 MUST BE ORDERED SEPARTELY
General information
Vendor identification (VendorID)		80FBh
Supply voltage
Load voltage 1L+
● Rated value (DC)		24 V
● Reverse polarity protection		Yes
Load voltage 2L+
● Rated value (DC)		24 V
● Reverse polarity protection		Yes
Input current
from load voltage 2L+ (without load), max.		80 mA; Typical
from supply voltage 1L+, max.		70 mA; Typical
Power losses
Power loss, typ.		4 W
Digital outputs
Number of digital outputs		16
short-circuit protection		Yes
● Response threshold, typ.		1.4 A (per channel)
Limitation of inductive shutdown voltage to		2L+ (-47 V)
Controlling a digital input		Yes
Switching capacity of the outputs
● Lamp load, max.		5 W
Load resistance range
● lower limit		12 Ω
● upper limit		4 kΩ
Output voltage
● for signal "1", min.		2L+ (-0,8 V)
Output current
● for signal "1" rated value		0.5 A
● for signal "1" permissible range for 0 to 55 °C, min.		5 mA
● for signal "1" permissible range for 0 to 55 °C, max.		1 A
● for signal "0" residual current, max.		0.1 mA
Parallel switching of 2 outputs
● for increased power		No
● for redundant control of a load		Yes
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		0.5 Hz; to IEC 947-5-1, DC-13
● on lamp load, max.		1 Hz
Aggregate current of outputs (per group)
all mounting positions
— up to 55 °C, max.		4 A; Please note the current carrying capacity of the cable!
Cable length
● Cable length unshielded, max.		30 m
Interfaces
PROFIBUS DP
● Transmission rate, max.		12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 / 12 Mbit/s
Protocols
PROFIBUS DP		Yes
Interrupts/diagnostics/status information
Status indicator		Yes
Alarms
● Alarms		No
Diagnostic messages
● Diagnostics		Yes; Diagnostic information readable
Diagnostics indication LED
● Group error SF (red)		Yes
● Status indicator digital output (green)		Yes
● Channel error indicator F (red)		No
Galvanic isolation
between PROFIBUS DP and all other circuit components		Yes
Galvanic isolation digital outputs
● between the channels		No
Permissible potential difference
between different circuits		75 VDC / 60 VAC
Isolation
Isolation checked with		500 V DC
Dimensions
Width		60 mm
Height		210 mm
Depth		28 mm
Weights
Weight, approx.		210 g
last modified:		25.09.2014