6ES7138-4FB01-0AB0 ET200S, EL-MOD., 4 F-DO, DC 24V/2A

Product Code: 6ES7138-4FB01-0AB0

Availability: In Stock

Price: $169.20
Qty:
Add to Wish List
Add to Compare
  
 
SIMATIC DP, ELECTRON. MODULE F. ET200S, 4 F-DO PROFISAFE, DC 24V/2A, 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Reverse polarity protection No
Input current
from load voltage L+ (without load), max. typ. 100 mA
from backplane bus 3.3 V DC, max. 28 mA
Power losses
Power loss, typ. 3.5 W
Digital outputs
Number of digital outputs 4
Limitation of inductive shutdown voltage to typ. (L+) -47 V
Controlling a digital input No
Switching capacity of the outputs
Lamp load, max. 10 W
Load resistance range
lower limit 12 Ω
upper limit 1 kΩ
Output voltage
for signal "1", min. L+ (-2,0 V), current sourcing switch: L+ (-1,5 V), voltage drop on current sinking switch: max. 0.5 V
Output current
for signal "1" rated value 2 A
for signal "1" permissible range for 0 to 60 °C, min. 20 mA
for signal "1" permissible range for 0 to 60 °C, max. 2.4 A
for signal "0" residual current, max. 0.5 mA; Current-sourcing: max. 0.5 mA; Current sinking: max. 4 mA
Parallel switching of 2 outputs
for increased power No
for redundant control of a load No
Switching frequency
with resistive load, max. 30 Hz
with inductive load, max. 0.1 Hz
on lamp load, max. 10 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max. 4 mA
horizontal installation
up to 40 °C, max. 6 A
up to 55 °C, max. 5 A
vertical installation
up to 40 °C, max. 4 mA
Cable length
Cable length, shielded, max. 200 m
Cable length unshielded, max. 200 m
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions Yes
Wire break Yes
Short circuit Yes
Diagnostics indication LED
Group error SF (red) Yes
Status indicator digital output (green) Yes
Galvanic isolation
Galvanic isolation digital outputs
between the channels No
between the channels and the backplane bus Yes
between the channels and the load voltage L+ No
Standards, approvals, certificates
Highest safety class achievable in safety mode
acc. to DIN VDE 0801 AK 6
acc. to EN 954 Cat. 4
acc. to IEC 61508 SIL 3
Dimensions
Width 30 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 85 g
Status Jun 9, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue