6ES7132-4BD50-0AA0 ET200S,4DO SINK OUTPUT DC24V/0,5A , 5PCS

6ES7132-4BD50-0AA0 ET200S,4DO SINK OUTPUT DC24V/0,5A , 5PCS

Product Code: 6ES7132-4BD50-0AA0

Availability: In Stock

Price: $102.07
Qty:
Add to Wish List
Add to Compare
  
 
Electronic module 4DO DC24V/0.5A SINK

-
SIMATIC DP, 5 ELECTRON. MODULES FUER ET 200S, 4 DO SINK OUTPUT DC 24V/0.5A, 15 MM WIDTH, 5 PIECES PER PACKAGING UNIT
Supply voltage
Reverse voltage protection Yes; when using the same load voltage as on the power module
Load voltage L+
24 V
Yes
Input current
5 mA
from backplane bus 3.3 V DC, max. 10 mA
Power losses
Power loss, typ. 0.8 W
Address area
Address space per module
with packing 4 bit
without packing 1 byte
Digital outputs
Number of digital outputs 4
Short-circuit protection Yes
Controlling a digital input Yes
Switching capacity of the outputs
Lamp load, max. 5 W
Load resistance range
48 Ω
3400 Ω
Output voltage
for signal "1", min. 1 V
Output current
for signal "1" rated value 0.5 A
for signal "1" permissible range for 0 to 60 °C, min. 5 mA
for signal "1" permissible range for 0 to 60 °C, max. 700 mA
for signal "0" residual current, max. 5 µA
Output delay with resistive load
"0" to "1", max. 300 µs
"1" to "0", max. 600 µs
Parallel switching of 2 outputs
for increased power No
for redundant control of a load Yes; per module
Switching frequency
100 Hz
0.5 Hz
10 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max. 2 A
Cable length
1000 m
600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal) Yes
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions No
Diagnostics indication LED
Status indicator digital output (green) Yes
Parameter
Remark 1 byte
Galvanic isolation
Galvanic isolation digital outputs
between the channels No
between the channels and the backplane bus Yes
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 40 g
Status May 14, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue