6ES7131-1BH01-0XB0 ET200L, EL-BLOCK, 16DI, DC 24V

6ES7131-1BH01-0XB0 ET200L, EL-BLOCK, 16DI, DC 24V

Product Code: 6ES7131-1BH01-0XB0

Availability: In Stock

Price: $122.62
Qty:
Add to Wish List
Add to Compare
  
 
ET 200L

-
SIMATIC DP, ELECTRONIC BLOCK FOR ET 200L, 16 DI, 24V DC
Supply voltage
24 V DC Yes
Reverse polarity protection Yes
Hardware configuration
Rack
Required terminal block TB 16L
Digital inputs
Number of digital inputs 16
Input voltage
Type of input voltage DC
Rated value, DC 24 V
for signal "0" -30 to +5 V
for signal "1" 13 to 30 V
Input current
for signal "1", typ. 5 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", min. 2 ms
at "0" to "1", max. 4.5 ms
Cable length
Cable length for NAMUR input, shielded, max. 1000 m
Interfaces
PROFIBUS DP
Transmission rate, max. 1.5 Mbit/s
Yes
Galvanic isolation
between PROFIBUS DP and all other circuit components Yes
Galvanic isolation digital inputs
between the channels No
between the channels and PROFIBUS DP Yes
Degree and class of protection
IP20 Yes
Ambient conditions
Operating temperature
Ambient temperature / with horizontal mounting position / during operating phase / minimum 0 °C
Ambient temperature / with horizontal mounting position / during operating phase / maximum 60 °C
Air pressure
Air pressure / minimum 795 hPa
Air pressure / maximum 1080 hPa
Relative humidity
Relative humidity / during operating phase / minimum 5 %
max. relative humidity 95 %
Vibrations
Operation, checked according to IEC 60068-2-6 Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
checked according to IEC 60068-2-27 Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Connection method
Inputs/outputs Screw-type and spring-loaded terminals, permanent wiring; standard: 2-wire connection, optional: 3 and 4-wire connection
Dimensions
Width 145 mm
Height 60 mm
Depth 60.5 mm
Status May 9, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue