6ES7132-0BH11-0XB0 ET200B, EL-BLOCK, 16DO, DC 24V, 2A

0 reviews | Write a review

Product Code: 6ES7132-0BH11-0XB0

Availability: In Stock

Price: $341.13

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

	SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 16 DO 24V DC, 2A, DEGR. OF PROTECT. IP20,STANDARD

Supply voltage
24 V DC	Yes; L1+, L2+, L3+, L4+, L5+; value at t < 0.5 s: 35 V
permissible range, lower limit (DC)	18.5 V
permissible range, upper limit (DC)	30.2 V
Input current
Current consumption, max.	100 mA; From L5+; logic
I²t	0.05 A²·s; with starting current inrush
Power losses
Power loss, typ.	7 W
Hardware configuration
Rack
Required terminal block	TB2/DC, TB2-4/DC, TB4/DC, TB4-4/DC
Digital outputs
Number of digital outputs	16
Short-circuit protection	Yes; Electronic
Limitation of inductive shutdown voltage to	typ. (L1+ to L4+) -50 V
Controlling a digital input	Yes
Switching capacity of the outputs
Lamp load, max.	10 W
Output voltage
Rated value (DC)	24 V
for signal "0", max.	2 V; idling
for signal "1", min.	UE -3 V
Output current
for signal "1" permissible range for 0 to 60 °C, min.	2 A; in groups of 4
for signal "0" residual current, max.	1 mA
Switching frequency
with resistive load, max.	100 Hz
with inductive load, max.	0.5 Hz
on lamp load, max.	8 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max.	4 A
Cable length
Cable length unshielded, max.	100 m
Interfaces
PROFIBUS DP
Transmission rate, max.	12 Mbit/s
SYNC capability	Yes
Communication functions
Bus protocol/transmission protocol	PROFIBUS DP
Interrupts/diagnostics/status information
Diagnostics indication LED
Bus fault BF (red)	Yes
Run mode RUN (green)	Yes
Status indicator digital output (green)	Yes
Galvanic isolation
between electronic block and PROFIBUS DP	Yes
Galvanic isolation digital outputs
Galvanic isolation digital outputs	Yes
between the channels, in groups of	4
Degree and class of protection
IP20	Yes
Ambient conditions
Operating temperature
horizontal installation, min.	0 °C
horizontal installation, max.	60 °C; 40°C for other mountings
Air pressure
permissible range, min.	795 hPa
permissible range, max.	1080 hPa
Relative humidity
Operation, min.	15 %
max. relative humidity	95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
Operation, checked according to IEC 60068-2-6	Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
checked according to IEC 60068-2-27	Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Connection method
Inputs/outputs	Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection
Dimensions
Width	235 mm; EB and TB
Height	130 mm; EB and TB
Depth	60 mm; EB and TB
Weights
Weight, approx.	900 g; EB and TB
Status	Jun 16, 2014