6ES7131-1EH00-0XB0 ET200L, EL-BLOCK, 16DI, AC 120V

Product Code: 6ES7131-1EH00-0XB0

Availability: In Stock

Price: $327.43
Qty:
Add to Wish List
Add to Compare
  
 
SIMATIC DP, ELECTRONIC BLOCK FOR ET 200L, 16 DI, 120V AC W. 1 POINT COMMO
General information
Vendor identification (VendorID) 002AH
Supply voltage
24 V DC Yes
Reverse polarity protection Yes
Input current
from supply voltage L1, max. 90 mA
Power loss
Power loss, typ. 5.4 W
Hardware configuration
Rack
required terminal block TB 16L AC
Digital inputs
Number of digital inputs 16
Input characteristic curve in accordance with IEC 61131, type 2 Yes
Number of simultaneously controllable inputs 16
Input voltage
Rated value, AC 120 V
for signal "0" 0 to 20 V
for signal "1" 74 to 132 V
Input current
for signal "0", min. 0 mA
for signal "0", max. (permissible quiescent current) 4 mA
for signal "1", typ. 9 mA; 9 to 27 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", min. 2 ms
at "0" to "1", max. 14 ms
at "1" to "0", min. 6 ms
at "1" to "0", max. 25 µs
Cable length
Cable length unshielded, max. 600 m
Cable length for NAMUR input, shielded, max. 1000 m
Encoder
Connectable encoders
2-wire sensor Yes
Interfaces
PROFIBUS DP
Transmission rate, max. 1.5 Mbit/s; 9,6 / 19,2 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 Mbit/s
FREEZE capability Yes
Direct data exchange (slave-to-slave communication) Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC)
Communication functions
Bus protocol/transmission protocol PROFIBUS DP
Interrupts/diagnostics/status information
Alarms
Alarms No
Diagnostic messages
Diagnostic functions Yes
Diagnostics indication LED
Bus fault BF (red) Yes
Status indicator digital output (green) Yes
Status indicator digital input (green) Yes
Monitoring 24 V voltage supply ON (green) Yes
Galvanic isolation
between PROFIBUS DP and all other circuit components Yes
Galvanic isolation digital inputs
between the channels Yes
between the channels and PROFIBUS DP Yes
Isolation
Isolation tested with 1500 V AC
Degree and class of protection
IP20 Yes
Ambient conditions
Operating temperature
horizontal installation, min. 0 °C
horizontal installation, max. 60 °C; 40°C for other mountings
Air pressure
permissible range, min. 795 hPa
permissible range, max. 1080 hPa
Relative humidity
Operation, min. 5 %
Operation, max. 95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
Operation, tested according to IEC 60068-2-6 Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
tested according to IEC 60068-2-27 Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Connection method
Inputs/outputs Screw-type and spring-loaded terminals, permanent wiring; standard: 2-wire connection, optional: 3 and 4-wire connection
Dimensions
Width 191 mm
Height 61 mm
Depth 85.5 mm
Weights
Weight, approx. 341 g
Status Jul 21, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue