|
SIMATIC SC,ELECTRONIC SUBMODULE 2 DO, 24 V DC / 2 A 2 PIECES PER PACKAGING UNIT |
|
Supply voltage |
Load voltage L+ |
Rated value (DC) |
24 V |
Input current |
from supply voltage L+, max. |
6 mA |
Power losses |
Power loss, typ. |
0.9 W |
Hardware configuration |
Rack |
Required terminal block |
TB 16SC |
Digital outputs |
Number of digital outputs |
2 |
Product function / at the digital outputs / short-circuit protection |
Yes; Electronic |
Response threshold, typ. |
2.8 to 7.2 A |
Limitation of inductive shutdown voltage to |
typ. (L+) -48 V |
Controlling a digital input |
Yes |
Switching capacity of the outputs |
Lamp load, max. |
10 W |
Load resistance range |
lower limit |
12 Ω |
upper limit |
4800 Ω |
Output voltage |
for signal "1", min. |
L+ (-0.5 V) |
Output current |
for signal "1" rated value |
2 A |
for signal "1" permissible range for 0 to 40 °C, min. |
5 mA |
for signal "1" permissible range for 0 to 40 °C, max. |
2.4 A |
for signal "1" permissible range for 40 to 60 °C, min. |
5 mA |
for signal "1" permissible range for 40 to 60 °C, max. |
1.8 A |
for signal "0" residual current, max. |
0.6 mA |
Output delay with resistive load |
"0" to "1", max. |
200 µs |
"1" to "0", max. |
1.3 ms |
Parallel switching of 2 outputs |
for increased power |
Yes |
for redundant control of a load |
No |
Switching frequency |
with resistive load, max. |
100 Hz |
with inductive load, max. |
0.2 Hz; with inductive load to IEC 947-5-1, 13 DC /15 AC: 0.2 Hz at 1 A, 0.1 Hz at 2 A |
on lamp load, max. |
1 Hz |
Total current of the outputs (per module) |
horizontal installation |
up to 40 °C, max. |
3 A |
up to 60 °C, max. |
2 A |
Cable length |
Cable length, shielded, max. |
1000 m |
Cable length unshielded, max. |
600 m |
Interrupts/diagnostics/status information |
Alarms |
Alarms |
No |
Diagnostic messages |
Diagnostic functions |
No |
Diagnostics indication LED |
Status indicator digital output (green) |
Yes |
Galvanic isolation |
Galvanic isolation digital outputs |
between the channels |
No |
between the channels and the backplane bus |
No; Optocoupler |
Isolation |
Isolation checked with |
1500 V AC |
Dimensions |
Width |
10 mm |
Height |
64 mm |
Depth |
51 mm |
Required slots |
1; from 8 |
Weights |
Weight, approx. |
15 g |
Status |
Dec 2, 2013 |