6GK7142-2AH00-0XA0 CP 142-2 (AS-I V2.0)

6GK7142-2AH00-0XA0 CP 142-2 (AS-I V2.0)

Product Code: 6GK7142-2AH00-0XA0

Availability: In Stock

Price: $284.28
Qty:
Add to Wish List
Add to Compare
CP 142-2 communication processor
SIMATIC NET, CP 142-2 COMMUNICATIONS PROCESSOR FOR CONN. OF SIMATIC ET 200X TO AS-INTERFACE ACCOR. AS-INTERFACE SPEC. V2.0
 
General technical data:
Product designation AS-Interface Master
Product type designation CP 142-2
Protection class IP IP20
Design of the electrical connection / of the AS-interface M12 connector
Type of voltage supply via backplane bus
Operating condition / separate power supply 24 V No
Consumed current  
  • from profile conductors of the AS-interface
  
  • at 24 V / with AS-i Power24V / maximum
mA100
  • from backplane bus / maximum
mA60
Active power lossW4.4
Insulation voltage / Rated valueV500
Product function / suitable for AS-i Power24V No
Product property / redundancy capability No
Product function / web-based management No
Product function / Diagnostics via email No
Product function / Galvanic isolation Yes
  • as status display by LED
 SF, APF, SER, AUP, CM
Type of configuration / of the AS-interface Set pushbutton on device, GSD, command interface
 
Communication:
    
Version / of the AS-interface specification V 2.0
Type of data transmission ET 200X backplane bus
Number of units / per CPU / maximum 6
Number of interfaces  
  • as AS-interface
 1
  • acc. to RS 485
 0
  • acc. to Industrial Ethernet
 0
  • acc. to PROFINET
 0
  • acc. to wireless
 0
  • acc. to USB
 0
  • other
 2
Product component / optical interface No
Protocol / is supported  
  • ASIsafe (Safety at work) protocol
 No
  • PROFIsafe protocol
 No
  • PROFIBUS protocol
 No
  • PROFINET IO protocol
 No
  • PROFINET CBA protocol
 No
  • TCP/IP
 No
  • SNMP
 No
Standard for wireless communication / IEEE 802.11 No
 
Ein- und Ausgänge:
    
Number of inputs / for AS Interface / maximum 124
Number of outputs / for AS Interface / maximum 124
Number of AS-i slaves / per AS-Interface / maximum 31
Bus cycle time / of the AS-interface  
  • for 31 slaves
ms5
  • for 62 slaves
ms10
Access to digital I/O data via process diagram/peripheral addresses and data record transfer
 
Mechanical design:
   
Widthmm87
Heightmm110
Depthmm63
Mounting type Screw fixing or ET 200X mounting plate
Module format ET 200X design
 
Ambient conditions:
    
Ambient temperature  
  • if installed on horizontal mounting rail / during operation
°C0…55
  • if installed on vertical mounting rail / during operation
°C0…55
  • during transport
°C-40…+70
  • during storage
°C-40…+70
Relative humidity / at 25 °C / during operation / maximum%95
Installation altitude / at height above sea level / maximumm2,000
 
Safety:
    
Suitability for use / safety-related function No
Explosion protection marking / for intrinsic safety of related equipment  
  • EEX ia
 No
  • EEX ib
 No
Explosion protection category for gas none
Explosion protection category for dust none
 
Certificates/approvals:
    
General Product Approval EMC Shipping Approval
EAC
C-TICK
PRS / Polski Rejestr Statkow
      
 
Further information:
Information- and Downloadcenter (Catalogs, Brochures,…)
http://www.siemens.com/industrial-controls/catalogs
Industry Mall (Online ordering system)
http://www.siemens.com/industrial-controls/mall
Cax online generator:
http://www.siemens.com/cax
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
http://support.automation.siemens.com/WW/view/en/6GK7142-2AH00-0XA0/all
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=6GK7142-2AH00-0XA0
 
SIMATIC NET, CP 142-2 communications processor, to as-interface
 
 
last change:
Oct 20, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue