6ES7322-1HH01-0AA0 SM322, 16DO RELAY

Product Code: 6ES7322-1HH01-0AA0

Availability: In Stock

Price: $202.76
  
 
Artikelnummer 6ES7322-1HH01-0AA0
SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED 16DO, RELAY CONTACTS, 1 X 20 PIN
Supply voltage
Load voltage L+
● Rated value (DC) 120 V
Load voltage L1
● Rated value (AC) 230 V
Input current
from backplane bus 5 V DC, max. 100 mA
Power losses
Power loss, typ. 4.5 W
Digital outputs
Number of digital outputs 16; Relays
Switching capacity of the outputs
● Lamp load, max. 50 W; 230 V AC
Output current
● for signal "1" rated value 2 A
● for signal "1" minimum load current 10 mA
Switching frequency
● with resistive load, max. 1 Hz
● with inductive load, max. 0.5 Hz
● on lamp load, max. 1 Hz
● mechanical, max. 10 Hz
Aggregate current of outputs (per group)
horizontal installation
— up to 60 °C, max. 8 A
vertical installation
— up to 40 °C, max. 8 A
Relay outputs
● Rated input voltage of relay coil L+ (DC) 24 V
● Number of operating cycles, max. 100 000; 50000 (24 V DC, at 2 A); 700000 (120 V AC, at 2 A); 100000 (230 V AC, at 2 A)
Switching capacity of contacts
— with inductive load, max. 2 A; 2 A (230 V AC), 2 A (24 V DC)
— with resistive load, max. 2 A; 2 A (230 V AC), 2 A (24 V DC)
Cable length
● Cable length, shielded, max. 1 000 m
● Cable length unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm No
Diagnostic messages
● Diagnostics No
● Wire break No
● Short circuit No
● Fuse blown No
● Missing load voltage No
Diagnostics indication LED
● Rated load voltage PWR (green) No
● Fuse OK FSG (green) No
Galvanic isolation
Galvanic isolation digital outputs
● between the channels, in groups of 8
● between the channels and the backplane bus Yes; Optocoupler
Isolation
Isolation checked with 1500 V AC
Connection method
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 250 g
last modified: 13.10.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: