6ES7317-2EJ10-0AB0 CPU317-2 PN/DP, 512KB

0 reviews | Write a review

Product Code: 6ES7317-2EJ10-0AB0

Availability: In Stock

Price: $2,688.63

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7317-2EJ10-0AB0


General information
Hardware product version		02
Firmware version		V2.3.0
Engineering with
● Programming package		STEP 7 V5.3 or higher
Supply voltage
external protection for power supply lines (recommendation)		2 A min.
Memory
Backup
● present		Guaranteed by MMC (maintenance-free)
● without battery		Program and data
CPU-blocks
Number of blocks (total)		(DBs, FCs, FBs OBs, SDBs); the maximum number of loadable blocks can be reduced by the MMC being used.
DB
● Number, max.		Number band: 1 to 2047
FB
● Number, max.		Number range: 0 to 2047
FC
● Number, max.		Number range: 0 to 2047
OB
● Number, max.		see instruction list
● Number of free cycle OBs		OB 1
● Number of time alarm OBs		OB 10
● Number of delay alarm OBs		OB 20, 21
● Number of time interrupt OBs		OB 32, 33, 34, 35
● Number of process alarm OBs		OB 40
● Number of startup OBs		OB 100
● Number of asynchronous error OBs		OB 80
● Number of synchronous error OBs		OB 121, 122
Counters, timers and their retentivity
S7 counter
of which retentive without battery
— preset		Z 0 to Z 7
IEC counter
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
S7 times
Retentivity
— preset		No retentivity
IEC timer
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area, total		All, max. 256 KB
Flag
● Retentivity available		From MB 0 to MB 4095
● Retentivity preset		MB 0 to MB 15
● Number of clock memories		1 memory byte
Data blocks
● Number, max.		from DB 1 to DB 2047
● Retentivity adjustable		via non-retain property on DB
● Retentivity preset		Yes
Time of day
Clock
● Backup time		At 40 °C ambient temperature
Operating hours counter
● Number/Number range		0 to 3
● Range of values		0 to 2^31 hours (when using SFC 101)
● Granularity		1 hour
● retentive		Must be restarted at each restart
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
DP slave
● automatic baud rate search		only with passive interface
Services
— Routing		with interface active
2. Interface
Interface type		PROFINET
Physics		RJ45
automatic detection of transmission rate		10/100 Mbit/s
Functionality
● PROFINET IO Controller		Firmware Status V2.3 or higher
PROFINET IO Controller
● Updating time		1 to 512 ms (minimum value depends on communication share set for PROFINET I/O, on the number of I/O devices, and on the volume of configured user data)
Services
— S7 communication		with loadable FBs, max. configurable connections: 16
— Open IE communication		via TCP/IP
Communication functions
S7 basic communication
● User data per job (of which consistent), max.		76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● as client		via integrated PROFINET interface and loadable FB or via CP and loadable FB
● User data per job, max.		See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
S5 compatible communication
● supported		via CP and loadable FC
Open IE communication
● TCP/IP		via integrated PROFINET interface and loadable FBs
PROFINET CBA (at set setpoint communication load)
HMI variables via PROFINET (acyclic)
— Number of stations that can log on for HMI variables (PN OPC/iMap)		2x PN OPC/1x iMap
PROFIBUS proxy functionality
— Data length per connection, max.		Slave-dependent
S7 message functions
Number of login stations for message functions, max.		Depending on the configured connections for PG/OP and S7 basic communication
Test commissioning functions
Status/control
● Variables		Inputs, outputs, memory bits, DB, times, counters
Forcing
● Forcing, variables		Inputs, outputs
Configuration
Configuration software
● STEP 7		V5.3 or higher
Programming
● Command set		see instruction list
● System functions (SFC)		see instruction list
● System function blocks (SFB)		see instruction list
last modified:		21.08.2014