6ES7307-1EA80-0AA0 PS307 24 V/ 5 A OUTDOOR

6ES7307-1EA80-0AA0 PS307 24 V/ 5 A OUTDOOR

Product Code: 6ES7307-1EA80-0AA0

Availability: In Stock

Price: $102.75
Qty:
Add to Wish List
Add to Compare
  
 
SITOP in SIMATIC S7-300-design 24 V, 5 A Outdoor
SIMATIC S7-300 OUTDOOR STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: 24 V DC/5 A
Technical specifications
Product PS 307
Power supply, type 24 V/5 A
Input
Input 1-phase AC
Supply voltage / 1 / at AC / nominal value 120 V
Supply voltage / 2 / at AC / nominal value 230 V
Supply voltage  
  • Note
 Set by means of selector switch on the device
Input voltage / 1 / at AC 93…132 V
Input voltage / 2 / at AC 187…264 V
Wide-range input No
Overvoltage resistance 2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min. 20 ms
Mains buffering at Vin = 93/187 V
Rated line frequency 50/60 Hz
Rated line range 47...63 Hz
Input current / at nominal level of the input voltage 120 V 2.1 A
Input current / at nominal level of the input voltage 230 V 1.2 A
Switch-on current limiting (+25 °C), max. 45 A
Duration of current limiting / at 25 °C / maximum 3 ms
I²t, max. 1.8 A²·s
Built-in incoming fuse T 3,15 A/250 V (not accessible)
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic C or from 6 A characteristic D
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.2 %
Static load balancing, approx. 0.4 %
Residual ripple peak-peak, max. 150 mV
Residual ripple peak-peak, typ. 40 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) 90 mV
Product feature / output voltage adjustable No
Output voltage setting -
Status display Green LED for 24 V OK
On/off behavior No overshoot of Vout (soft start)
Startup delay, max. 3 s
Voltage rise, typ. 100 ms
Rated current value Iout rated 5 A
Current range 0…5 A
delivered active power / typ. 120 W
short-term overload current / at short-circuit during run-up / typical 20 A
Duration of overloading ability for excess current / on short-circuiting during the start-up 180 ms
short-term overload current / at short-circuit during operation / typical 20 A
Duration of overloading ability for excess current / on short-circuiting during the operational phase 80 ms
Parallel switching for enhanced performance No
Efficiency
Efficiency at Vout rated, Iout rated, approx. 84 %
Power loss at Vout rated, Iout rated, approx. 23 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 0.3 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 3 %
Load step setting time 50 to 100%, typ. 0.2 ms
Load step setting time 100 to 50%, typ. 0.2 ms
Setting time / maximum 5 ms
Protection and monitoring
Output overvoltage protection Additional control loop, shutdown at approx. 30 V, automatic restart
Current limitation 5.5…6.5 A
Characteristic feature of the output / short-circuit protected Yes
Short-circuit protection Electronic shutdown, automatic restart
Enduring short circuit current / Effective level / maximum 5 A
Safety
Primary/secondary isolation Yes
Potential separation Safety extra low output voltage Vout according to EN 60950-1 and EN 50178, creepage distances and clearances > 5 mm
Protection class Class I
stray current / maximum 3.5 mA
stray current / typical 0.3 mA
CE mark Yes
UL/CSA approval Yes
UL/cUL (CSA) approval UL-Listed (UL 508), File E143289, CSA (CSA C22.2 No. 142)
Explosion protection -
FM approval -
CB approval No
Marine approval -
Degree of protection (EN 60529) IP20
EMC
Emitted interference EN 55011 Class A
Supply harmonics limitation -
Noise immunity EN 61000-6-2
Operating data
Ambient temperature / in operation -25…+70 °C
  • Note
 with natural convection
Ambient temperature / on transport -40…+85 °C
Ambient temperature / in storage -40…+85 °C
Humidity class according to EN 60721 Climate class 3K5, transient condensation permitted
Mechanics
Connection technology screw-type terminals
Connections / Supply input L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded
Connections / Output L+, M: 3 screw terminals each for 0.5 ... 2.5 mm²
Connections / Auxiliary -
Width / of the housing 80 mm
Height / of the housing 125 mm
Depth / of the housing 120 mm
Installation width 80 mm
Mounting height 205 mm
Weight, approx. 0.57 kg
Product feature / of the housing / housing for side-by-side mounting Yes
Mounting type / wall mounting No
Type of mounting / standard rail mounting No
Mounting type / S7 rail mounting Yes
Installation Can be mounted onto S7 rail
Mechanical accessories Mounting adapter for standard mounting rail (6ES7390-6BA00-0AA0)
Other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
   
 
letzte Änderung:
Sep 1, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue