6ES7151-1BA00-0AB0 ET200S, INTERF.MOD. IM151-1 HF, 12MBIT/S

6ES7151-1BA00-0AB0 ET200S, INTERF.MOD. IM151-1 HF, 12MBIT/S

Product Code: 6ES7151-1BA00-0AB0

Availability: In Stock

Price: $243.86
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7151-1BA00-0AB0
SIMATIC DP, INTERFACE MODULE IM151-1 HIGH FEATURE F. ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUMEN 244 BYTE FOR I/O, MAX. 63 MODULES CONNECTABLE; ISOCHRONE MODE, BUS INTERFACING VIA 9-WAY SUB-D CONNECTOR, INCL. TERMINATING MODULE
General information
Vendor identification (VendorID) 80E0h
Supply voltage
Mains buffering
● Mains buffering, min. 20 ms
Input current
from supply voltage 1L+, max. 200 mA
Power losses
Power loss, typ. 3.3 W
Address area
Addressing volume
● Inputs 244 byte
● Outputs 244 byte
Interfaces
Interface physics, RS 485 Yes; 9-pin sub D socket
PROFIBUS DP
● PROFIBUS DP, output current, max. 80 mA
● Transmission rate, max. 12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 / 12 Mbit/s
● SYNC capability Yes
● FREEZE capability Yes
● Direct data exchange (slave-to-slave communication) Yes
Cable length
— Cable length, max. 1 200 m
Protocols
PROFIBUS DP Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal) Yes; From 1.5 Mbit/s
Interrupts/diagnostics/status information
Alarms
● Alarms Yes
Diagnostic messages
● Diagnostic functions Yes
Diagnostics indication LED
● Bus fault BF (red) Yes
● Group error SF (red) Yes
● Monitoring 24 V voltage supply ON (green) Yes
Galvanic isolation
between backplane bus and electronics No
between electronic block and PROFIBUS DP Yes
between supply voltage and electronics No
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation checked with 500 V DC
Dimensions
Width 45 mm
Height 119.5 mm
Depth 75 mm
Weights
Weight, approx. 150 g
last modified: 18.09.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue