6ES7141-4BF00-0AB0 ET200PRO, EM 8DI 24V DC HF

6ES7141-4BF00-0AB0 ET200PRO, EM 8DI 24V DC HF

Product Code: 6ES7141-4BF00-0AB0

Availability: In Stock

Price: $82.20
Qty:
Add to Wish List
Add to Compare
  
 
Digital electronic modules 8DI and 4DQ

-
SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 8 DI DC 24V HIGH FEATURE, CHANNEL DIAGNOSTICS; SHORT CIRCUIT AND WIRE BREAK; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY
FH technology
Module for failsafe applications No
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes; against destruction; load increasing
Input current
from backplane bus 3.3 V DC, max. 40 mA
from supply voltage 1L+, max. 20 mA
Encoder supply
8
Yes
Output current
up to 55 °C, max. 1 A
Power losses
Power loss, typ. 2.5 W
Address area
Occupied address area
Inputs 1 byte
Digital inputs
Number of digital inputs 8
Input characteristic curve in accordance with IEC 61131, type 1 No
Input characteristic curve in accordance with IEC 61131, type 2 Yes
Number of simultaneously controllable inputs
all mounting positions
up to 55 °C, max. 8
Input voltage
Type of input voltage DC
Rated value, DC 24 V
for signal "0" -3 to +5 V
for signal "1" 11 to 30 V
Input current
for signal "1", typ. 7 mA
Input delay (for rated value of input voltage)
for standard inputs
Parameterizable Yes
at "0" to "1", min. 0.5 ms
at "0" to "1", max. 20 ms
at "1" to "0", min. 0.5 ms
at "1" to "0", max. 20 ms
Cable length
30 m
30 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions Yes; channel by channel, parameterizable
Diagnostic information readable Yes
Wire break Yes; Monitoring, I < 0.3 mA
Short circuit Yes
Diagnostics indication LED
Group error SF (red) Yes
Status indicator digital input (green) Yes; Per channel
Parameter
Diagnostic alarm Yes
Hardware interrupt for 6 channels
Diagnosis: wire break channel by channel
Diagnosis: short circuit channel by channel
Galvanic isolation
between backplane bus and all other circuit components Yes
Galvanic isolation digital inputs
between the channels No
between the channels and the backplane bus Yes
Degree and class of protection
IP65 Yes
IP66 Yes
IP67 Yes
Dimensions
Width 45 mm
Height 130 mm
Depth 35 mm; without terminal module
Weights
Weight, approx. 140 g
Status May 9, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue