6ES7138-4DA04-0AB0 ET200S, EL-MOD., COUNTER 100KHZ, 24V DC

6ES7138-4DA04-0AB0 ET200S, EL-MOD., COUNTER 100KHZ, 24V DC

Product Code: 6ES7138-4DA04-0AB0

Availability: In Stock

Price: $119.88
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7138-4DA04-0AB0
SIMATIC DP, ELECTRONIC MODULE F. ET 200S, 1 COUNT 24V/100KHZ 15 MM WIDE, OPERATION MODES: COUNT, MEASURE, (PERIOD DURATION MEASUREMENT HIGH RESOLUTION) WITH CLOCK CYCLIC SYNCHRON.APP
Supply voltage
Load voltage L+
● Rated value (DC) 24 V
● permissible range, lower limit (DC) 20.4 V
● permissible range, upper limit (DC) 28.8 V
● Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 42 mA
from backplane bus 3.3 V DC, max. 10 mA
Encoder supply
24 V encoder supply
● 24 V Yes; L+ (-0.8 V)
● short-circuit protection Yes
● Output current, max. 500 mA
Power losses
Power loss, typ. 1 W
Hardware configuration
Module exchange
● Hot swapping the IM-DP Yes
● Module exchange under process voltage Yes
Digital inputs
Number of digital inputs 1
Functions Gate control, synchronization, latch function
Input characteristic curve in accordance with IEC 61131, type 2 Yes
Input voltage
● Rated value (DC) 24 V
● for signal "0" -30 to +5 V
● for signal "1" +11 to +30 V
Input current
● for signal "0", max. (permissible quiescent current) 2 mA
● for signal "1", typ. 9 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max. 2.5 µs; Filter off: 2.5 µs (200 kHz), filter on: 25 µs (20 kHz)
Cable length
● Cable length, shielded, max. 100 m; Filter 20 kHz: 100 m, filter 200 kHz: 50 m
Digital outputs
Number of digital outputs 1
short-circuit protection Yes
● Response threshold, typ. 2.6 A to 4 A
Limitation of inductive shutdown voltage to L+ (-50 to -60 V)
Controlling a digital input Yes
Switching capacity of the outputs
● Lamp load, max. 5 W
Output voltage
● Rated value (DC) 24 V
● for signal "0", max. 3 V
● for signal "1", min. L+ (-1 V)
Output current
● for signal "1" permissible range for 0 to 40 °C, min. 5 mA
● for signal "1" permissible range for 0 to 40 °C, max. 2 000 mA
● for signal "1" permissible range for 0 to 60 °C, min. 5 mA
● for signal "1" permissible range for 0 to 60 °C, max. 500 mA; 1000 mA at 50 °C
● for signal "0" residual current, max. 0.5 mA
Output delay with resistive load
● "0" to "1", max. 100 µs
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 2 Hz
● on lamp load, max. 10 Hz
Cable length
● Cable length, shielded, max. 1 000 m
● Cable length unshielded, max. 600 m
Encoder
Number of connectable encoders, max. 1
Connectable encoders
● Incremental encoder (asymmetrical) Yes
● 24 V initiator Yes
● 2-wire sensor Yes
Interrupts/diagnostics/status information
Diagnostic messages
● Diagnostic functions Yes
Diagnostics indication LED
● Group error SF (red) Yes
● Status indicator digital output (green) Yes
● Status indicator digital input (green) Yes
● Status indicator backward counting (green) Yes
● Status indicator forward counting (green) Yes
Integrated Functions
Measuring functions
Measuring range
— Frequency measurement, min. 0.1 Hz
— Frequency measurement, max. 100 kHz
— Period measurement, min. 10 µs
— Period measurement, max. 120 s
— Velocity measurement, min. 1 1/min
— Velocity measurement, max. 25 000 1/min
Counter
Number of counter inputs 1; 32 Bit
Minimum pulse width 2.5 µs; Filter off: 2.5 µs (200 kHz), filter on: 25 µs (20 kHz)
Parameter
Remark 16 byte
Galvanic isolation
Galvanic isolation digital inputs
● Galvanic isolation digital inputs No; only opposite shielding
Galvanic isolation counter
● between the channels and the backplane bus Yes
● between the channels and the load voltage L+ No
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 40 g
last modified: 13.10.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue