6ES7134-4GB61-0AB0 ET200S, EL-MOD., 2AI HS I-4DMU, 0-20MA,

0 reviews | Write a review

Product Code: 6ES7134-4GB61-0AB0

Availability: In Stock

Price: $143.85

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7134-4GB61-0AB0

		SIMATIC DP, ELECTRONIC MODULE ET 200S: 2AI HIGH SPEED I-4WIRE 4 - 20MA; 14BIT, 15 MM WIDTH, FOR 4-WIRE TRANSDUCER, CYCLE TIME OF THE MODULE: 1MS, WITH LED SF (GROUP FAULT)
Supply voltage
Load voltage L+
● Rated value (DC)		24 V; From power module
● Reverse polarity protection		Yes
Input current
from load voltage L+ (without load), max.		35 mA
from backplane bus 3.3 V DC, max.		10 mA
Encoder supply
Number of outputs		2
Output voltage		L+ (-2.5 V), under load
short-circuit protection		Yes; Electronic
Output current
● Rated value		90 mA; both channels
● permissible range		0 to 90 mA
Power losses
Power loss, typ.		0.8 W
Address area
Address space per module
● Address space per module, max.		4 byte
Analog inputs
Number of analog inputs		2
permissible input current for current input (destruction limit), max.		60 mA
Cycle time (all channels) max.		1 ms; Per module
Input ranges
● Current		Yes
Input ranges (rated values), currents
● Input resistance (0 to 20 mA)		0.05 kΩ
● -20 to +20 mA		Yes
● 4 to 20 mA		Yes
Cable length
● Cable length, shielded, max.		200 m
Analog value creation
Measurement principle		Actual value encryption
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.		14 bit; 4 to 20 mA: 13 bits, 0 to 20 mA: 13 bits, +/-20 mA: 13 bits + sign
● Conversion time (per channel)		0.1 ms
Smoothing of measured values
● Parameterizable		Yes; In four stages by means of digital filtering
● Step: None		Yes; 1 x cycle time
● Step: low		Yes; 64 x cycle time
● Step: Medium		Yes; 128 x cycle time
● Step: High		Yes; 512x cycle time
Encoder
Connection of signal encoders
● for current measurement as 2-wire transducer		Yes
— Burden of 2-wire transmitter, max.		670 Ω
Errors/accuracies
Linearity error (relative to input range), (+/-)		0.01 %
Temperature error (relative to input range), (+/-)		0.01 %/K
Crosstalk between the inputs, min.		50 dB
Repeat accuracy in steady state at 25 °C (relative to input area), (+/-)		0.05 %
Operational limit in overall temperature range
● Current, relative to input area, (+/-)		0.3 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input area, (+/-)		0.2 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min.		70 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Interrupts/diagnostics/status information
Alarms
● Hardware interrupt		Yes; Parameterizable
Diagnostic messages
● Diagnostic information readable		Yes
● Wire break		Yes
● Group error		Yes
● Overflow/underflow		Yes
Diagnostics indication LED
● Group error SF (red)		Yes
Parameter
Remark		12 byte
Diagnosis: wire break		Disable / enable
Measurement type/range		deactivated / +/-20 mA / 0 to 20 mA / 4 to 20 mA
Group diagnostics		Disable / enable
Overflow/underflow		Disable / enable
Galvanic isolation
Galvanic isolation analog inputs
● between the channels		No
● between the channels and the backplane bus		Yes
● between the channels and the load voltage L+		No
Permissible potential difference
between MANA and M internally (UISO)		75 VDC / 60 VAC
Isolation
Isolation checked with		500 V DC
Dimensions
Width		15 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		40 g
last modified:		25.09.2014