6ES7132-4BD30-0AB0 ET200S, EL-MOD., 4DO HF, DC24V, 2A, 5PCS

6ES7132-4BD30-0AB0 ET200S, EL-MOD., 4DO HF, DC24V, 2A, 5PCS

Product Code: 6ES7132-4BD30-0AB0

Availability: In Stock

Price: $208.93
Qty:
Add to Wish List
Add to Compare
  
 
Electronic module 4DO DC24V/0.5A SINK

-
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DO SHIGH FEATURE 24V/2A DC, 15 MM WIDTH DIAGNOSIS SHORT CIRCUIT, SF-LED 5 PIECES PER PACKAGING UNIT
Supply voltage
Reverse voltage protection Yes; when using the same load voltage as on the power module
Load voltage L+
Rated value (DC) 24 V; From power module
Reverse polarity protection Yes; polarity reversal can lead to the digital outputs being connected through
Input current
from load voltage L+ (without load), max. 5 mA; Per channel
from backplane bus 3.3 V DC, max. 10 mA
Power losses
Power loss, typ. 1.6 W
Address area
Address space per module
with packing 4 bit
without packing 1 byte
Digital outputs
Number of digital outputs 4
Short-circuit protection Yes
Response threshold, typ. 5 to 10 A
Limitation of inductive shutdown voltage to L+ -(37 to 41V)
Controlling a digital input Yes
Load resistance range
lower limit 12 Ω
upper limit 3400 Ω
Output voltage
for signal "1", min. L+ (-1.0 V)
Output current
for signal "1" rated value 2 A
for signal "1" permissible range for 0 to 60 °C, min. 7 mA
for signal "1" permissible range for 0 to 60 °C, max. 2.4 A
for signal "0" residual current, max. 0.5 mA
Output delay with resistive load
"0" to "1", max. 250 µs
"1" to "0", max. 400 µs
Parallel switching of 2 outputs
for increased power No
for redundant control of a load Yes; per module
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 2 Hz
on lamp load, max. 10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 60 °C, max. 4 A
vertical installation
up to 40 °C, max. 4 A; At 55 °C and 24 V DC
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal) Yes
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions Yes
Short circuit Yes; Module-wise
Diagnostics indication LED
Group error SF (red) Yes; SF-LED (red)
Status indicator digital output (green) Yes; Per channel
Galvanic isolation
Galvanic isolation digital outputs
between the channels No
between the channels and the backplane bus Yes
Isolation
Isolation checked with 500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 40 g
Status May 14, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue