6ES7132-7HB00-0AB0 ET200ISP, RELAY-MOD., 2DO, UC60V, 2A

6ES7132-7HB00-0AB0 ET200ISP, RELAY-MOD., 2DO, UC60V, 2A

Product Code: 6ES7132-7HB00-0AB0

Availability: In Stock

Price: $154.13
Qty:
Add to Wish List
Add to Compare
  
 
Digital output module 4DO 17.4 V DC

-
SIMATIC DP, ELECTRONIC SUBMODULE, FOR ET200ISP, 2DO RELAY UC60V / 2A
Input current
from load voltage L+ (without load), max. 120 mA
Power loss
Power loss, typ. 1 W
Digital outputs
Number of digital outputs 2
Short-circuit protection Yes
Output current
for signal "1" rated value 2 A
Output delay with resistive load
"0" to "1", max. 8 ms
"1" to "0", max. 3 ms
Parallel switching of 2 outputs
for uprating No
for redundant control of a load No
Switching frequency
with resistive load, max. 0.5 Hz; See data in manual
with inductive load, max. 0.2 Hz; See data in manual
Relay outputs
Switching capacity of contacts
with resistive load, up to 60 °C, max. 2 A; See data in manual
Thermal continuous current, max. 2 A; See data in manual
Cable length
Cable length, shielded, max. 500 m
Cable length unshielded, max. 500 m
Interrupts/diagnostics/status information
Status indicator Yes
Substitute values connectable Yes
Alarms
Alarms No
Diagnostic alarm Yes
Hardware interrupt No
Diagnostic messages
Diagnostic information readable Yes
Wire-break No; Cannot be determined in contact power circuit
Short-circuit No; Cannot be determined in contact power circuit
Diagnostics indication LED
Group error SF (red) Yes
Status indicator digital output (green) Yes; Per channel
Ex(i) characteristics
Max. values of output circuits (per channel)
Uo (output no-load voltage), max. 60 V
Um (fault voltage), max. 250 V
Ta (permissible ambient temperature), max. 70 °C
Galvanic isolation
Galvanic isolation digital outputs
between the channels Yes
between the channels and the backplane bus Yes
between the channels and the load voltage L+ Yes; Channels and power bus
Standards, approvals, certificates
CE mark Yes
Use in hazardous areas
Type of protection acc. to EN 50020 (CENELEC) II 2 G and I M2 Ex eibmb IIC T4; Ex eibmb I
Type of protection acc. to KEMA 07 ATEX 0180
Dimensions
Width 30 mm
Height 129 mm
Depth 136.5 mm
Weights
Weight, approx. 280 g
Status Jul 7, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue