6ES7132-0HH01-0XB0 ET200B, EL-BLOCK, 16RO, AC 120/230V,2/4A

Product Code: 6ES7132-0HH01-0XB0

Availability: In Stock

Price: $541.84
Qty:
Add to Wish List
Add to Compare
  
 
SIMATIC DP, ELECT. SUBMODULE DIGITAL, FOR ET200B, W=235MM 16RO, 120/230V AC,2/4A APPLICABLE ON TB6/AC RELAY SWITCHING VOLTAGE 230V AC
Hardware configuration
Rack
Required terminal block TB6/AC
Digital outputs
Number of digital outputs 16; 4 high and 12 low current relays
short-circuit protection No
Output voltage
Rated value (DC) 61 to 150 V DC
Switching frequency
with resistive load, max. 10 Hz
with inductive load, max. 2 Hz
Relay outputs
Switching capacity of contacts
with resistive load, max. 4 A; 4 A (2 ports); 2 A (12 ports)
Cable length
Cable length unshielded, max. 600 m
Interfaces
PROFIBUS DP
Transmission rate, max. 12 Mbit/s
Galvanic isolation
between electronic block and PROFIBUS DP Yes
Galvanic isolation digital outputs
Galvanic isolation digital outputs Yes
between the channels, in groups of 1
Degree and class of protection
IP20 Yes
Ambient conditions
Operating temperature
horizontal installation, min. 0 °C
horizontal installation, max. 60 °C; 40°C for other mountings
Air pressure
permissible range, min. 795 hPa
permissible range, max. 1080 hPa
Relative humidity
Operation, min. 15 %
Operation, max. 95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
Operation, checked according to IEC 60068-2-6 Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
checked according to IEC 60068-2-27 Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Connection method
Inputs/outputs Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection
Status Jan 23, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue