6ES7131-4BD50-0AA0 ET200S, EL-MOD., 2DI HF, DC 24V, 5PCS.

Product Code: 6ES7131-4BD50-0AA0

Availability: In Stock

Price: $99.33
Qty:
Add to Wish List
Add to Compare
  
 
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DI SOURCE INPUT 24V DC, 15 MM WIDTH, 5 PIECES PER PACKAGING UNIT
Supply voltage
24 V DC Yes; From power module
Reverse polarity protection Yes
Input current
from supply voltage L+, max. Dependent on encoder
Encoder supply
Output voltage max. M +0.5 V, under load
Output current
Output current, rated value 500 mA
Output current, permissible range 0 to 500 mA
Power losses
Power loss, typ. 0.7 W
Address area
Address space per module
with packing 4 bit
without packing 1 byte
Digital inputs
Number of digital inputs 4
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input voltage
Rated value, DC 24 V
for signal "0" -5 to +30 V
for signal "1" -15 to -30 V
Input current
for signal "1", typ. 7 mA; at 24 V
Input delay (for rated value of input voltage)
for standard inputs
Parameterizable No
at "0" to "1", min. 2 ms; typically 3 ms
at "0" to "1", max. 4.5 ms
at "1" to "0", min. 2 ms; typically 3 ms
at "1" to "0", max. 4.5 ms
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 1.5 mA
Interrupts/diagnostics/status information
Diagnostic messages
Diagnostic functions No
Diagnostics indication LED
Status indicator digital input (green) Yes
Galvanic isolation
Galvanic isolation digital inputs
between the channels No
between the channels and the backplane bus Yes
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation checked with 500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 35 g
Status Jun 16, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue