| Product type designation |
CP 1243-1 DNP3 |
|
COMMUNICATION PROCESSOR CP 1243-1 DNP3 FOR CONNECTING OF SIMATIC S7-1200 TO CONTROL CENTER WITH DNP3 PROTOCOL |
| Transmission rate |
| Transfer rate |
|
| ● at the 1st interface |
10 ... 100 Mbit/s |
| Interfaces |
| Number of interfaces / acc. to Industrial Ethernet |
1 |
| Number of electrical connections |
|
| ● at the 1st interface / acc. to Industrial Ethernet |
1 |
| ● for power supply |
0 |
| Design of the electrical connection |
|
| ● at the 1st interface / acc. to Industrial Ethernet |
RJ45 port |
| Supply voltage, current consumption, power loss |
| Type of voltage / of the supply voltage |
DC |
| Supply voltage / 1 / from backplane bus |
5 V |
| Consumed current |
|
| ● from backplane bus / for DC / at 5 V / typical |
0.25 A |
| Active power loss |
1.25 W |
| Permitted ambient conditions |
| Ambient temperature |
|
| ● for vertical installation / during operation |
-20 ... +60 °C |
| ● for horizontally arranged busbars / during operation |
-20 ... +70 °C |
| ● during storage |
-40 ... +70 °C |
| ● during transport |
-40 ... +70 °C |
| Relative humidity / at 25 °C / without condensation / during operation / maximum |
95 % |
| Protection class IP |
IP20 |
| Design, dimensions and weight |
| Module format |
Compact module S7-1200 single width |
| Width |
30 mm |
| Height |
110 mm |
| Depth |
75 mm |
| Net weight |
0.122 kg |
| Mounting type |
|
| ● 35 mm DIN rail mounting |
Yes |
| ● wall mounting |
Yes |
| Product properties, functions, components / general |
| Number of units |
|
| ● per CPU / maximum |
3 |
| Performance data |
| Performance data / S7 communication |
| Number of possible connections / for S7 communication |
|
| ● Note |
like CPU |
| Performance data / telecontrol |
| Suitability for use |
|
| ● Node station |
No |
| ● substation |
Yes |
| ● TIM control center |
No |
| Connection to the control center |
control center with DNP3 function |
| Connection to the control center / by means of a permanent connection |
supported |
| Connection to the control center / Note |
Connection to Scada system using DNP3 services |
| Protocol / is supported |
|
| ● DNP3 |
Yes |
| ● IEC 60870-5 |
No |
| Product function / data buffering if connection is aborted |
Yes |
| ● Note |
64,000 values |
| Number of data points per station / maximum |
200 |
| Performance data / Teleservice |
| Diagnostics function / online diagnostics with SIMATIC STEP 7 |
Yes |
| Product function |
|
| ● program download with SIMATIC STEP 7 |
Yes |
| ● Remote firmware update |
Yes |
| Product functions / management, configuration |
| Configuration software |
|
| ● required |
STEP 7 Basic/Professional V12 SP1 (TIA Portal) or higher |
| Product functions / Time |
| Protocol / is supported / NTP |
No |
| Further Information / Internet Links |
| Internet-Link |
|
| ● to website: Selector SIMATIC NET SELECTION TOOL |
http://www.siemens.com/snst |
| ● to website: Industrial communication |
http://www.siemens.com/simatic-net |
| ● to website: Information and Download Center |
http://www.siemens.com/automation/net/catalog |
| ● to website: Image database |
http://automation.siemens.com/bilddb |
| ● to website: CAx Download Manager |
http://www.siemens.com/cax |
| ● to website: Industry Online Support |
http://support.automation.siemens.com |
| last modified: |
03.11.2014 |
Date
04.11.2014 |
Changes preserved
© Copyright Siemens AG 2014 |
