6GK6022-8AS1.-.... RUGGEDCOM RSG2288NC

Product Code: 6GK6022-8AS1.-....

Availability: In Stock

Price: $100,000,000,000.00
Qty:
Add to Wish List
Add to Compare
Artikelnummer 6GK6022-8AS1.-....
Product type designation RUGGEDCOM RSG2288NC
Product description
THE RUGGEDCOM RSG2288NC IS AN INDUSTRIALLY HARDENED, FULLY MANAGED MODULAR GIBAGIT ETHERNET SWITCH; 56-BIT ENCRYPTION; UP TO 9-GIGABIT ETHERNET PORTS COPPER AND/OR FIBER; UP TO 9 100FX FIBER FAST ETHERNET PORTS; 2 PORT MODULES FOR TREMENDOUS FLEXIBILITY; MULTIMODE, SINGLEMODE; NON-BLOCKING, STORE AND FORWARD SWITCHING; LONG HAUL OPTICS ALLOW GIGABIT DISTANCES UP TO 70KM; MULTIPLE CONNECTOR TYPES (LC, SC, SFP, GBIC)
Transmission rate
Transfer rate 10 Mbit/s, 100 Mbit/s, 1000 Mbit/s
Interfaces
Number of electrical/optical connections
● for network components or terminal equipment / maximum 9
● for network components or terminal equipment / maximum / Note 6 Slots in sum: 1, 2, 3, 4 two Ethernet-Ports each, 5 one Ethernet-Port, 6 one PTP Module
● for gigabit Ethernet / maximum 9
Number of electrical connections
● for network components or terminal equipment / maximum 9
● for gigabit Ethernet / maximum 9
● for operator console 1
● for management purposes 0
Design of the electrical connection
● for operator console RJ45
● for power supply and signaling contact 10-pole terminal block, screwable or plugable, screw contact
● for GPS 50 ohm BNC female connector
● for IRIG-B 50 ohm BNC female connector
Number of optical interfaces
● for network components or terminal equipment / maximum 9
Range / at the optical interface / depending on the optical fiber used 2 ... 90 km
● with gigabit 0.5 ... 70 km
Signal-Inputs/outputs
Relay design Form-C contact relay (SP CO)
Type of relay output Changeover contact
Operating voltage / of the signaling contacts
● with AC / maximum 250 V
● for DC / maximum 125 V
Operating current / of the signaling contacts
● with AC / at 250 V / maximum 2 A
● for DC / at 30 V / maximum 2 A
Product component
● IRIG-B PWM output Yes
● IRIG-B PWM input Yes
Type of signal
● at the IRIG-B output IRIG-B unmodulated (TTL) or PPS
● at the IRIG-B input TTL levels PWM output (Format B002, B003)
Accuracy / at IRIG-B / not less than 1 µs
Protocol / at GPS input / is supported / NMEA 0183 Yes
Supply voltage, current consumption, power loss
product options / wide range power supply Yes
Supply voltage / 1 / Rated value 24 V
● Supply voltage / 1 / Rated value 10 ... 36 V
● Type of voltage / 1 / of the supply voltage DC
● Consumed current / 1 / at rated supply voltage / maximum 1.2 A
Supply voltage / 2 / Rated value 48 V
● Supply voltage / 2 / Rated value 36 ... 72 V
● Type of voltage / 2 / of the supply voltage DC
● Consumed current / 2 / at rated supply voltage / maximum 0.6 A
Supply voltage / 3 / Rated value
● Supply voltage / 3 / Rated value 88 ... 300 V
● Type of voltage / 3 / of the supply voltage DC
Supply voltage / 4 / Rated value
● Supply voltage / 4 / Rated value / minimum 85 V
● Supply voltage / 4 / Rated value / maximum 264 V
● Type of voltage / 4 / of the supply voltage AC
Active power loss
● maximum 28 W
Permitted ambient conditions
Ambient temperature
● during operation -40 ... +85 °C
● Note A maximum operating temperature of +85 °C is permissible for a duration of 16 hours
Operating condition / fanless operation Yes
Coating Conformal Coating optional
Protection class IP IP40
Design, dimensions and weight
Display version / LED panel mounted on the front or on the rear side Yes
Design 19" rack
Number of height units / relating to 19-inch cabinet 1
Number of slots 6
Width 464.8 mm
Height 44.2 mm
Depth 315 mm
Net weight 4.8 kg
Material / of the enclosure 18 AWG galvanized steel enclosure
Mounting type
● 19-inch installation Yes
● 35 mm DIN rail mounting Yes
● wall mounting Yes
Product properties, functions, components / general
Product function
● Temperature Compensated Oscillator (TCXO) Yes
Number of automatically learnable MAC addresses 8192
Storage capacity
● of the MAC-address table 64 Kibyte
Switch latency period 7 µs
Transfer rate / of the switch 18 Gbit/s
Number of priority channels 4
Product property
● active antenna with 5 volt supply connectable Yes
● no head-off-line-blocking Yes
● Store & Forward switching method Yes
● Zero-Packet-Loss technology Yes
Product functions / management, configuration
Product function
● CLI Yes
● web-based management Yes
● MIB support Yes
● RMON Yes
● switch-managed Yes
Protocol / is supported
● Telnet Yes
● HTTP Yes
● HTTPS No
● TFTP Yes
● IGMP (snooping/querier) Yes
Number of groups / at IGMP 256
Protocol / is supported
● SNMP v1 Yes
● SNMP v2 No
● SNMP v2c Yes
● SNMP v3 Yes
Product function / for MIB support
● by BRIDGE-MIB RFC1493
● by IF-MIB RFC2863
● by RMON-MIB RFC2819
● by RSTP-MIB draft-ietf-bridge-bridgemib-smiv2-03-RSTP-MIB
● by SNMPv2-MIB RFC1907
● by SNMPv2-SMI RFC2578
● by SNMPv2-TC RFC2579
● by TCP-MIB RFC2012
● by UDP-MIB RFC2013
Product functions / Diagnosis
Product function
● peer-to-peer measurement of delay time Yes
Product functions / VLAN
Product function
● VLAN - port based Yes
VLAN identification number 1 ... 4094
Protocol / is supported / GVRP Yes
Product functions / DHCP
Product function
● DHCP client Yes
● DHCP Option 82 Yes
● DHCP Option 66 No
● DHCP Option 67 No
Product functions / Redundancy
Product function
● redundancy procedure STP Yes
● redundancy procedure RSTP Yes
● redundancy procedure MSTP Yes
● eRSTP Yes
Protocol / is supported
● STP Yes
● RSTP Yes
● MSTP Yes
Product functions / Security
Product function
● IEEE 802.1x (radius) Yes
Protocol / is supported
● TACACS+ Yes
● SSH No
● SSL No
Key length
● with RSA 1024 bit
Product function / port-rate-limiting Yes
Product functions / Time
Product function
● SNTP client Yes
● SNTP server Yes
● IEEE 1588 v2 to IRIG-B conversion Yes
Protocol / is supported
● SNTP Yes
Accuracy / at IEEE 1588 v2
● not less than 1 µs
● typical 100 ns
Product function / hardware-supported timestamp at all ports Yes
Standards, specifications, approvals
Standard
● for EMC FCC Part 15 (Class A), EN55022 (CISPR22 Class A)
● for safety / from CSA and UL cCSAus (Compliant with CSA C22.2 No. 60950, UL60950, EN60950)
Laser protection class Complies with 21 CFR Chapter1, Subchapter J
Certificate of suitability
● CE marking Yes
● IEC 61850-3 Yes
product conformity
● acc. to IEEE 802.3-10BaseT Yes
● acc. to IEEE 802.3u-100BaseTX Yes
● acc. to IEEE 802.3u-100BaseFX Yes
● acc. to IEEE 802.3ab-1000BaseT Yes
● acc. to IEEE 802.3z-1000BaseLX Yes
● acc. to IEEE 802.3ad-Link Aggregation Yes
● acc. to IEEE 802.3x-Flow Control Yes
● acc. to IEEE 802.1d-MAC Bridges Yes
● acc. to IEEE 802.1d-STP Yes
● acc. to IEEE 802.1p-class of service Yes
● acc. to IEEE 802.1Q-VLAN tagging Yes
● acc. to IEEE 802.1w-RRST Yes
● acc. to IEEE 802.1x-port based Network Access Control Yes
● acc. to IEEE 1588 v2-Precision Time Protocol Yes
● RFC768-UDP Yes
● RFC783-TFTP Yes
● RFC791-IP Yes
● RFC792-ICMP Yes
● RFC793-TCP Yes
● RFC826-ARP Yes
● RFC854-Telnet Yes
● RFC894-IP over Ethernet Yes
● RFC1112-IGMPv1 Yes
● RFC1519-CIDR Yes
● RFC1541-DHCP (client) Yes
● RFC2068-HTTP Yes
● RFC2236-IGMPv2 Yes
● RFC2284-EAP Yes
● RFC2475-Differentiated Service Yes
● RFC2865-RADIUS Yes
● RFC3414-SNMPv3-USM Yes
● RFC3415-SNMPv3-VACM Yes
Further Information / Internet Links
Internet-Link
● to website: Industry Mall/RUGGEDCOM selector http://ruggedcom-selector.automation.siemens.com
● to website: Siemens RUGGEDCOM http://siemens.com/ruggedcom
● to website: Selector for cables and connectors http://www.siemens.com/snst
● to website: Industrial communication http://www.siemens.com/simatic-net
● to website: Information and Download Center http://www.siemens.com/automation/net/catalog
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support http://support.automation.siemens.com
Security information
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4)
last modified: 23.10.2014
Date
30.10.2014		 Changes preserved
© Copyright Siemens AG 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue