6GK6011-0PX2.-.... RUGGEDCOM RX1100P

Product Code: 6GK6011-0PX2.-....

Availability: In Stock

Price: $100,000,000,000.00
Qty:
Add to Wish List
Add to Compare
Artikelnummer 6GK6011-0PX2.-....
Product type designation RUGGEDCOM RX1100P
Product description Advanced Cyber Security Appliance
THE RUGGEDROUTER RX1100P IS AN INDUSTRIALLY HARDENED, POWER OVER ETHERNET (POE) ENABLED, CYBER SECURITY APPLIAN WITH INTEGRATED ROUTER, FIREWAL AND VPN FUNCTIONALITY. PHYSICAL PORTS ETHERNET OPTIONS (UP TO 4 PORTS 10/100BASETX, 100BASEFX CELLULAR MODEM WAN PORT OPTIONS (UP TO 8 PORTS T1/E1, G.703, PPPOE/BRIDGED ETHERNET VIA ADSL T3 DS3, 56 KBPS DDS SERIAL PORTS (UP TO 8 PORTS): FULLY COMPLIANT EIA/TIA RS485, RS422, RS232 SERIAL PORTS EMBEDDED MODEM PORT PRECISION TIME PROTOCOL
Transmission rate
Transfer rate 10 Mbit/s, 100 Mbit/s
Interfaces
Number of electrical/optical connections
● for network components or terminal equipment / maximum 4
● for network components or terminal equipment / maximum / Note Ethernet Options (up to 4 ports)
Number of electrical connections
● for network components or terminal equipment / maximum 4
● for serial interfaces / acc. to RS 232/RS 422/RS 485 / maximum 8
● for operator console 1
● for management purposes 0
Design of the electrical connection
● for operator console RJ45
● for power supply and signaling contact 10-pole terminal block, screwable or plugable, screw contact
Number of optical interfaces
● for network components or terminal equipment / maximum 2
Range / at the optical interface / depending on the optical fiber used 2 ... 90 km
Signal-Inputs/outputs
Relay design Form-C contact relay (SP CO)
Type of relay output Changeover contact
Operating current / of the signaling contacts
● for DC / at 30 V / maximum 1 A
Supply voltage, current consumption, power loss
product options / wide range power supply Yes
Product component / Power supply for PoE Yes
Product property
● Voltage supply for PoE from the internal 48 V supply Yes
Supply voltage / 1 / Rated value 24 V
● Supply voltage / 1 / Rated value 9 ... 36 V
● Type of voltage / 1 / of the supply voltage DC
Supply voltage / 2 / Rated value 48 V
● Supply voltage / 2 / Rated value 36 ... 59 V
● Type of voltage / 2 / of the supply voltage DC
Supply voltage / 3 / Rated value
● Supply voltage / 3 / Rated value 88 ... 300 V
● Type of voltage / 3 / of the supply voltage DC
Supply voltage / 4 / Rated value
● Supply voltage / 4 / Rated value / minimum 85 V
● Supply voltage / 4 / Rated value / maximum 264 V
● Type of voltage / 4 / of the supply voltage AC
Active power loss
● maximum 25 W
Permitted ambient conditions
Ambient temperature
● during operation -40 ... +85 °C
● Note A maximum operating temperature of +85 °C is permissible for a duration of 16 hours
Operating condition / fanless operation Yes
Coating Conformal Coating optional
Protection class IP IP40
Design, dimensions and weight
Design 19" rack
Number of height units / relating to 19-inch cabinet 1
Number of slots 6
Width 436.88 mm
Height 44 mm
Depth 302.26 mm
Net weight 4.5 kg
Material / of the enclosure 18 AWG galvanized steel enclosure
Mounting type
● 19-inch installation Yes
● 35 mm DIN rail mounting Yes
● wall mounting Yes
Product properties, functions, components / general
Product function
● Transmission of serial data via IP-Networks Yes
● RAW socket mode for any serial protocols Yes
● RS 232/RS 422/RS 485 ports with software selectable Yes
Protocol / is supported / Generic Object Oriented Substation Events (GOOSE) Yes
Product functions / management, configuration
Product function
● CLI Yes
● web-based management Yes
● MIB support No
● RMON No
● switch-managed Yes
Protocol / is supported
● Telnet No
● HTTP Yes
● HTTPS No
● TFTP Yes
● IGMP (snooping/querier) No
Protocol / is supported
● SNMP v1 No
● SNMP v2 Yes
● SNMP v3 Yes
Product functions / Diagnosis
Product function
● loopback diagnostics No
Product functions / VLAN
Protocol / is supported / GVRP No
Product functions / DHCP
Product function
● DHCP client Yes
● DHCP Option 82 Yes
● DHCP Option 66 No
● DHCP Option 67 No
Product functions / Routing
Product function
● dynamic IP routing Yes
Protocol / is supported
● RIP v1 Yes
● OSPFv2 Yes
● VRRP Yes
● BGP Yes
● PPoE via DSL Yes
Product functions / Redundancy
Product function
● redundancy procedure STP Yes
● redundancy procedure RSTP Yes
● redundancy procedure MSTP Yes
● eRSTP Yes
Protocol / is supported
● STP Yes
● RSTP Yes
● MSTP Yes
Product functions / Security
Product function
● IEEE 802.1x (radius) No
Protocol / is supported
● SSL No
Product functions / Time
Protocol / is supported
● NTP Yes
Standards, specifications, approvals
Standard
● for EMC FCC Part 15 (Class A)
● for safety / from CSA and UL cCSAus CSA C22.2 No. 60950, UL 60950
Laser protection class Complies with 21 CFR Chapter1, Subchapter J
Certificate of suitability
● CE marking Yes
● IEC 61850-3 Yes
product conformity
● acc. to IEEE 802.3-10BaseT Yes
● acc. to IEEE 802.3u-100BaseTX Yes
● acc. to IEEE 802.3u-100BaseFX Yes
● RFC768-UDP Yes
● RFC783-TFTP Yes
● RFC791-IP Yes
● RFC792-ICMP Yes
● RFC793-TCP Yes
● RFC826-ARP Yes
● RFC854-Telnet Yes
● RFC1294-Frame Relay Yes
● RFC1305-NTP Yes
● RFC1321-PPP (MD5) Yes
● RFC1332-PPP (IPCP) Yes
● RFC1334-PPP Authentication Yes
● RFC1490-Frame Relay Yes
● RFC1519-CIDR Yes
● RFC1541-DHCP (client) Yes
● RFC1661-PPP Yes
● RFC2068-HTTP Yes
● RFC2338-VRRP Yes
● RFC2475-Differentiated Service Yes
Further Information / Internet Links
Internet-Link
● to website: Industry Mall/RUGGEDCOM selector http://ruggedcom-selector.automation.siemens.com
● to website: Siemens RUGGEDCOM http://siemens.com/ruggedcom
● to website: Selector for cables and connectors http://www.siemens.com/snst
● to website: Industrial communication http://www.siemens.com/simatic-net
● to website: Industry Mall https://mall.industry.siemens.com
● to website: Information and Download Center http://www.siemens.com/automation/net/catalog
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support http://support.automation.siemens.com
Security information
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4)
last modified: 15.12.2014
Date
05.01.2015		 Changes preserved
© Copyright Siemens AG 2015

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue