| Product type designation |
SCALANCE XM408-8C |
| Product description |
|
|
SCALANCE XM408-8C; MANAGED MODULAR IE SWITCH; LAYER 3 INTEGRATED; 8 X 10/100/1000 MBIT/S RJ45; 8 X 100/1000 MBIT/S SFP; CONTAINS 8 COMBO PORTS; USABLE 8 PORTS IN TOTAL; EXPANDABLE TO 24 PORTS ELEKTRICAL OR OPTICAL; MOUNTING DIN-/S7-PROFILE-RAIL; PROFINET-IO DEVICE; REDUNDANCY FUNCTIONS; OFFICE FEATURES (RSTP, VLAN, IGMP,..); C-PLUG IN SCOPE OF SUPPLY |
| Transmission rate |
| Transfer rate |
10 Mbit/s, 100 Mbit/s, 1000 Mbit/s |
| Interfaces |
| Number of electrical/optical connections |
|
| ● for network components or terminal equipment / maximum |
24 |
| ● as combo port / for network components or terminal equipment |
8 |
| Number of electrical connections |
|
| ● for network components or terminal equipment |
8 |
| ● for network components or terminal equipment / with extender modules |
16 |
| ● for SFP+/SFP |
8 |
| ● for operator console |
1 |
| ● for management purposes |
1 |
| ● for signaling contact |
1 |
| ● for power supply |
1 |
| ● for redundant voltage supply |
1 |
| Design of electrical/optical connections / for network components or terminal equipment |
SFP |
| Design of the electrical connection |
|
| ● for network components or terminal equipment |
RJ45 port |
| ● for network components or terminal equipment / with extender modules |
RJ45 port |
| ● for operator console |
RJ11 port |
| ● for management purposes |
RJ45 port |
| ● for signaling contact |
2-pole terminal block |
| ● for power supply |
4-pole terminal block |
| Number of optical interfaces |
|
| ● for fiber optic cable / at 100 Mbit/s |
8 |
| ● for fiber optic cable / at 1000 Mbit/s |
8 |
| ● for fiber optic cable / with extender modules |
16 |
| Design of the optical interface |
|
| ● for fiber optic cable / at 100 Mbit/s |
SFP slot |
| ● for fiber optic cable / at 1000 Mbit/s |
SFP slot |
| ● for fiber optic cable / with extender modules |
SFP slot |
| Number of extender expansion interfaces |
2 |
| design of the removable storage / C-PLUG/KEY-PLUG |
Yes |
| Signal-Inputs/outputs |
| Operating voltage / of the signaling contacts |
|
| ● for DC / Rated value |
24 V |
| Operating current / of the signaling contacts |
|
| ● for DC / maximum |
0.1 A |
| Supply voltage, current consumption, power loss |
| Type of voltage supply / redundant power supply unit |
No |
| Type of voltage / of the supply voltage |
DC |
| Supply voltage |
|
| ● external |
24 V |
| ● external |
19.2 ... 28.8 V |
| Product component / fusing at power supply input |
Yes |
| Fuse protection type / at input for supply voltage |
F 15 A / 125 V |
| Consumed current / maximum |
2 A |
| Active power loss |
|
| ● for DC / at 24 V |
48 W |
| Permitted ambient conditions |
| Ambient temperature |
|
| ● during operation |
-40 ... +70 °C |
| ● during storage |
-40 ... +85 °C |
| ● during transport |
-40 ... +85 °C |
| Relative humidity |
|
| ● at 25 °C / without condensation / during operation / maximum |
95 % |
| Protection class IP |
IP20 |
| Design, dimensions and weight |
| Design |
SIMATIC S7-1500 device design |
| Width |
140 mm |
| Height |
147 mm |
| Depth |
125 mm |
| Net weight |
1.15 kg |
| Mounting type |
|
| ● 19-inch installation |
No |
| ● 35 mm DIN rail mounting |
Yes |
| ● wall mounting |
No |
| ● S7-300 rail mounting |
Yes |
| ● S7-1500 rail mounting |
Yes |
| Product properties, functions, components / general |
| Cascading in cases of star topology |
Any (depending only on signal propagation time) |
| Product functions / management, configuration |
| Product function |
|
| ● CLI |
Yes |
| ● web-based management |
Yes |
| ● MIB support |
Yes |
| ● TRAPs via email |
Yes |
| ● Configuration with STEP 7 |
Yes |
| ● RMON |
Yes |
| ● Port mirroring |
Yes |
| ● multiport mirroring |
Yes |
| ● CoS |
Yes |
| ● PROFINET IO diagnosis |
Yes |
| ● switch-managed |
Yes |
| Telegram length / for Ethernet / maximum |
9216 byte |
| Protocol / is supported |
|
| ● Telnet |
Yes |
| ● HTTP |
Yes |
| ● HTTPS |
Yes |
| ● TFTP |
Yes |
| ● FTP |
Yes |
| ● BOOTP |
Yes |
| ● GMRP |
Yes |
| ● DCP |
Yes |
| ● LLDP |
Yes |
| ● IGMP (snooping/querier) |
Yes |
| Identification & maintenance function |
|
| ● I&M0 - device-specific information |
Yes |
| ● I&M1 – higher-level designation/location designation |
Yes |
| Protocol / is supported |
|
| ● SNMP v1 |
Yes |
| ● SNMP v2 |
Yes |
| ● SNMP v3 |
Yes |
| Product functions / Diagnosis |
| Product function |
|
| ● Port diagnostics |
Yes |
| ● Statistics Packet Size |
Yes |
| ● Statistics packet type |
Yes |
| ● Error statistics |
Yes |
| ● SysLog |
Yes |
| Product functions / VLAN |
| Product function |
|
| ● VLAN - port based |
Yes |
| ● VLAN - protocol-based |
Yes |
| ● VLAN - IP-based |
Yes |
| ● VLAN dynamic |
Yes |
| Number of VLANs / maximum |
255 |
| Number of VLANs - dynamic / maximum |
255 |
| Protocol / is supported / GVRP |
Yes |
| Product functions / DHCP |
| Product function |
|
| ● DHCP client |
Yes |
| ● DHCP Option 82 |
Yes |
| ● DHCP Option 66 |
Yes |
| ● DHCP Option 67 |
Yes |
| Product functions / Routing |
| Service / Routing / Note |
IP routing integrated, IPv6 available soon |
| Product function |
|
| ● Static IP routing |
Yes |
| ● Static IP routing IPv6 |
No |
| ● dynamic IP routing |
Yes |
| ● dynamic IP routing IPv6 |
No |
| Protocol / is supported |
|
| ● RIPv2 |
Yes |
| ● RIPnG for IPv6 |
No |
| ● OSPFv2 |
Yes |
| ● OSPFv3 for IPv6 |
No |
| ● VRRP |
Yes |
| ● VRRP for IPv6 |
No |
| Product functions / Redundancy |
| Product function |
|
| ● Ring redundancy |
Yes |
| ● High Speed Redundancy Protocol (HRP) |
Yes |
| ● high speed redundancy protocol (HRP) with redundancy manager |
Yes |
| ● high speed redundancy protocol (HRP) with standby redundancy |
Yes |
| ● Media Redundancy Protocol (MRP) |
Yes |
| ● media redundancy protocol (MRP) with redundancy manager |
Yes |
| ● redundancy procedure STP |
Yes |
| ● redundancy procedure RSTP |
Yes |
| ● redundancy procedure MSTP |
Yes |
| ● Passive listening |
Yes |
| Protocol / is supported |
|
| ● LACP |
Yes |
| Product functions / Security |
| Product function |
|
| ● ACL - MAC-based |
Yes |
| ● ACL - port/MAC-based |
Yes |
| ● IEEE 802.1x (radius) |
Yes |
| ● Broadcast/Multicast/Unicast Limiter |
Yes |
| ● broadcast blocking |
Yes |
| Protocol / is supported |
|
| ● SSH |
Yes |
| Product functions / Time |
| Product function |
|
| ● SICLOCK support |
Yes |
| Protocol / is supported |
|
| ● NTP |
Yes |
| ● SNTP |
Yes |
| Type of time synchronization |
IEEE 1588 available soon |
| Standards, specifications, approvals |
| Standard |
|
| ● for FM |
FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4 |
| ● for hazardous zone |
EN 60079-0: 2009, EN60079-15: 2010, II 3 G Ex nA IIC T4 Gc, KEMA 07 ATEX 0145 X |
| ● for safety / from CSA and UL |
UL 60950-1, CSA C22.2 No. 60950-1-03 |
| ● for hazardous zone / from CSA and UL |
ISA 12.12.01-2012 (Hazardous Location), Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4 |
| ● for emitted interference |
EN 61000-6-4 (Class A) |
| ● for interference immunity |
EN 61000-6-2 |
| Certificate of suitability |
EN 61000-6-2, EN 61000-6-4 |
| ● CE marking |
Yes |
| ● C-Tick |
Yes |
| ● KC approval |
No |
| ● E1 approval |
No |
| ● E1 approval |
No |
| MTBF / at 40 °C |
28 y |
| Further Information / Internet Links |
| Internet-Link |
|
| ● to website: Selector SIMATIC NET SELECTION TOOL |
http://www.siemens.com/snst |
| ● to website: Industrial communication |
http://www.siemens.com/simatic-net |
| ● to website: Information and Download Center |
http://www.siemens.com/automation/net/catalog |
| ● to website: Image database |
http://automation.siemens.com/bilddb |
| ● to website: CAx Download Manager |
http://www.siemens.com/cax |
| ● to website: Industry Online Support |
http://support.automation.siemens.com |
| Security information |
| Security information |
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) |
| last modified: |
23.10.2014 |
Date
05.11.2014 |
Changes preserved
© Copyright Siemens AG 2014 |
