6ES7147-1AA01-0XB0 ET200X, BM147/CPU, WITH PLC FUNCTIONS

Product Code: 6ES7147-1AA01-0XB0

Availability: In Stock

Price: $674.73
Qty:
Add to Wish List
Add to Compare
  
 
SIMATIC DP, BASIC MODULE ET200X: BM147/CPU, FOR PREPROCESSING WITH INT. SCOP OF PLC FUNCTIONS INT.PROFIBUS DP IF,PROT.IP66/67
Supply voltage
Load voltage 1L+
Rated value (DC) 24 V; Permissible current: 1 A up to 40 °C; 0.8 A up to 55 °C
Short-circuit protection Yes; Electronic
Reverse polarity protection Yes
Load voltage 2L+
Rated value (DC) 24 V
Reverse polarity protection No
Input current
from supply voltage 1L+, max. 160 mA
Power losses
Power loss, typ. 1.6 W
Memory
Work memory
integrated 24 kbyte; 1 instruction means 3 bytes on average
Load memory
expandable FEPROM No
integrated RAM, max. 40 kbyte; 40 KB RAM; 40 KB Flash (can be programmed in CPU section)
CPU processing times
for bit operations, typ. 1 ms per 1,000 binary statements
CPU-blocks
DB
Number, max. 128
FB
Number, max. 128
FC
Number, max. 128
OB
Number of free cycle OBs OB 1
Number of process alarm OBs OB 40
Number of startup OBs OB 100
Number of asynchronous error OBs OB 86, 122
Number of diagnostic alarm OBs OB 82
Nesting depth
per priority class 8
Counters, timers and their retentivity
S7 counter
Number 64
of which retentive without battery
adjustable Yes
lower limit 0
upper limit 63
S7 times
Number 128
of which retentive without battery
adjustable Yes
lower limit 0
upper limit 127
Data areas and their retentivity
Flag
Number, max. 256 byte
Retentivity available Yes; M 0.0 to M 255.7
of which retentive 0 to 2047
Data blocks
Number, max. 1
Size, max. 72 byte
Retentivity adjustable Yes
Address area
Digital channels
Inputs I 0.0 to I 31.7
Outputs Q 0.0 to Q 31.7
Analog channels
Inputs IW 256 to 367
Outputs QW 256 to 367
Hardware configuration
Expansion modules
Number of expansion modules, max. 7
of which motor starters/frequency converters, max. 6
of which, pneumatic interfaces, max. 6
Time of day
Clock
Software clock Yes
Interfaces
PROFIBUS DP
Data consistency byte, word, total
1st interface
Functionality
MPI Yes
DP slave Yes
DP slave
Transmission rate, min. 9.6 kbit/s
Transmission rate, max. 12 Mbit/s; 9,6 / 19,2 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 / 12 Mbit/s
Services
Direct data exchange (slave-to-slave communication) Yes; Sender
Transfer memory
Inputs 32 byte; Size and consistency can be set
Outputs 32 byte; Size and consistency can be set
Communication functions
Number of connections
usable for PG communication 1
reserved for PG communication 1
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes
Diagnostics indication LED
Bus fault BF (red) Yes
Rated load voltage PWR (green) Yes
Group error SF (red) Yes
Monitoring 24 V voltage supply ON (green) Yes
Configuration
Configuration software
STEP 7 Yes
programming
Command set Binary logic operations, bracketed operations, result allocation, saving, counting, loading, transferring, comparing, shifting, rotating, complementation, calling blocks, fixed point arithmetic, floating point arithmetic, jump functions
Nesting levels 8
Program organization Linear, structured
System functions (SFC) Interrupt and error processing, copy data, diagnostic functions, module parameterization
Dimensions
Width 134 mm; Width module 107 mm
Height 110 mm
Depth 55 mm
Status Jun 16, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue