6ES7138-4FA04-0AB0 ET200S, EL-MOD., 4/8 F-DI, DC 24V

Product Code: 6ES7138-4FA04-0AB0

Availability: In Stock

Price: $123.30
  
 
Artikelnummer 6ES7138-4FA04-0AB0
SIMATIC DP, ELECTRON. MODULE F. ET200S, 4/8 F-DI PROFISAFE, 24V DC, 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection No
Encoder supply
Number of outputs 2
Output voltage min. L+ (-1.5 V)
short-circuit protection Yes; Electronic (response threshold 0.7 A to 1.8 A)
Output current
● Rated value 300 mA
● permissible range 0 to 300 mA
Power losses
Power loss, typ. 4 W
Address area
Occupied address area
● Inputs 6 byte
● Outputs 4 byte
Digital inputs
Number of digital inputs 8; 8 single channel, 4 two-channel
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs 8
Input voltage
● Type of input voltage DC
● Rated value, DC 24 V
● for signal "0" -30 to +5 V
● for signal "1" 15 to 30 V
Input current
● for signal "1", typ. 3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— Parameterizable Yes
— at "0" to "1", min. 0.3 ms
— at "0" to "1", max. 17 ms
— at "1" to "0", min. 0.3 ms
— at "1" to "0", max. 17 ms
Cable length
● Cable length, shielded, max. 200 m
● Cable length unshielded, max. 200 m
Encoder
Connectable encoders
● 2-wire sensor No
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm Yes
Diagnostic messages
● Diagnostic functions Yes
● Diagnostic information readable Yes
● Short circuit Yes
Diagnostics indication LED
● Group error SF (red) Yes
● Status indicator digital input (green) Yes
Galvanic isolation
Galvanic isolation digital inputs
● between the channels No
● between the channels and the backplane bus Yes
● between the channels and the load voltage L+ No
Permissible potential difference
between M internally and the inputs 75 VDC / 60 VAC
Isolation
Isolation checked with 500 V DC
Standards, approvals, certificates
Highest safety class achievable in safety mode
● acc. to EN 954 4
● acc. to IEC 61508 SIL 2 (single-channel), SIL 3 (two-channel)
Dimensions
Width 30 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 78 g
last modified: 25.09.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: