6ES7138-4DB00-0AB0 ET 200S 1SSI 25Bit/2MHz

Product Code: 6ES7138-4DB00-0AB0

Availability: In Stock

Price: $822.00
  
 
Artikelnummer 6ES7138-4DB00-0AB0
SIMATIC DP, ELECTRONIC MODULE F. ET 200S, 1 SSI 25BIT/1MHZ 15MM WIDE MODULE FOR CONN. OF ABSOLUTE ENCODERS WITH SSI INTERFACE SYNCHRONOUS SERIAL INTERFACE WITH DI AND COMPAR. VALUE
Supply voltage
Load voltage L+
● Rated value (DC) 24 V
● permissible range, lower limit (DC) 20.4 V
● permissible range, upper limit (DC) 28.8 V
● Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 34 mA
from backplane bus 3.3 V DC, max. 10 mA
Encoder supply
Absolute encoder (SSI) encoder supply
● Absolute encoder (SSI) Yes
● Output voltage L+ (-0.8 V)
● Output current, max. 500 mA
● short-circuit protection Yes
Power losses
Power loss, typ. 0.8 W
Digital inputs
Number of digital inputs 1
Functions Trigger for unlatching the current actual value, e.g. for length measurement
Input characteristic curve in accordance with IEC 61131, type 2 Yes
Input voltage
● Rated value, DC 24 V
● for signal "0" 11 to 30 V DC
● for signal "1" -30 to +5 V DC
Input current
● for signal "0", max. (permissible quiescent current) 2 mA
● for signal "1", typ. 9 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max. 300 µs
Cable length
● Cable length, shielded, max. 600 m
● Cable length unshielded, max. 32 m
Encoder
Number of connectable encoders, max. 1
Connectable encoders
● Absolute encoder (SSI) Yes
● 2-wire sensor Yes
Encoder signals, absolute encoder (SSI)
● Message frame length, parameterizable 13, 21, 25 bit
● Binary code 1
● Gray code 1
● Cable length, shielded, max. 320 m; 320 m at 125 kHz, 160 m at 250 kHz, 60 m at 500 kHz, 20 m at 1 MHz, 8 m at 2 MHz, twisted in pairs and shielded
● Monoflop time settable: 16/32/48/64 µs
Interrupts/diagnostics/status information
Diagnostics indication LED
● Description 1 green LED for status indication of comparator No.1
● Group error SF (red) Yes
● Status indicator digital input (green) Yes
● Status indicator backward counting (green) Yes
● Status indicator forward counting (green) Yes
Parameter
Remark 8 byte
Galvanic isolation
Galvanic isolation counter
● between the channels and the backplane bus Yes
● between the channels and the load voltage L+ No
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 40 g
last modified: 25.09.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: