6ES7132-4FB00-0AB0 ET200S, ELECT. MOD., 2DO, AC 230V, 5PCS

Product Code: 6ES7132-4FB00-0AB0

Availability: In Stock

Price: $187.01
Qty:
Add to Wish List
Add to Compare
  
 
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DO 24...230V AC, 15 MM WIDTH 5 PIECES PER PACKAGING UNIT
Supply voltage
Reverse voltage protection Yes; when using the same load voltage as on the power module
Load voltage L+
Reverse polarity protection Yes
Load voltage L1
Rated value (AC) 24.23 V; From power module
permissible range, lower limit (AC) 24 V
permissible range, upper limit (AC) 230 V
permissible frequency range, lower limit 47 Hz
permissible frequency range, upper limit 63 Hz
Input current
from load voltage L+ (without load), max. 30 mA
from load voltage L1 (without load), max. 15 mA; Per channel
from backplane bus 3.3 V DC, max. 18 mA
Power losses
Power loss, typ. 4 W
Address area
Address space per module
with packing 2 bit
without packing 1 byte
Digital outputs
Number of digital outputs 2
Size of motor starter, max. up to 40 °C size acc. to NEMA: 5; up to 60 °C size acc. to NEMA: 4
Limitation of inductive shutdown voltage to -55 to -60 V
Zero-crossing switch Yes; Max. 25 V
Controlling a digital input Yes; possible
Switching capacity of the outputs
Lamp load, max. 100 W
Output voltage
for signal "1", min. L+ (-1.5 V)
Output current
for signal "1" rated value 2 A
for signal "1" permissible range for 0 to 60 °C, min. 0.1 mA
for signal "1" permissible range for 0 to 60 °C, max. 2.2 A
for signal "0" residual current, max. 3 mA
Output delay with resistive load
"0" to "1", max. 15 ms
"1" to "0", max. 15 ms
Parallel switching of 2 outputs
for increased power No
for redundant control of a load Yes; per module
Switching frequency
with resistive load, max. 10 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 1 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 40 °C, max. 2 A
up to 50 °C, max. 1.5 A
up to 60 °C, max. 1 A
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Substitute values connectable Yes; 0/1
Diagnostic messages
Diagnostic functions No
Diagnostics indication LED
Status indicator digital output (green) Yes
Parameter
Remark 3 byte
Behavior on CPU/Master STOP, channel-wise Substitute a value/keep last value
Galvanic isolation
Galvanic isolation digital outputs
between the channels No
between the channels and the backplane bus Yes
Isolation
Isolation checked with 2500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 37 g
Status Jun 9, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue