6ES7124-1GA00-0AB0 ET200L-SC, EL-MOD., 1AO, 0/4-20MA

0 reviews | Write a review

Product Code: 6ES7124-1GA00-0AB0

Availability: In Stock

Price: $78.78

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

	SIMATIC SC,ELECTRONIC SUBMODULE 1 AO, 4..20MA, +/-20MA

Supply voltage
Load voltage 1L+
Rated value (DC)	24 V
Reverse polarity protection	Yes
Input current
from supply voltage L+, max.	50 mA
Power loss
Power loss, max.	1 W
Hardware configuration
Rack
required terminal block	TB 16SC
Slots
required slots	2; from 8
Analog outputs
Number of analog outputs	1
Current output, no-load voltage, max.	16 V
Output ranges, current
0 to 20 mA	Yes
4 to 20 mA	Yes
Connection of actuators
for current output two-wire connection	Yes
Load impedance (in rated range of output)
with current outputs, max.	600 Ω; at common-mode voltage 2 V, max. 500 ohms; at common-mode voltage 0 V, max. 600 ohms; idle test
with current outputs, inductive load, max.	1 mH
Destruction limits against externally applied voltages and currents
Voltages at the outputs towards MANA	15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20)
Current, max.	50 mA; DC
Cable length
Cable length, shielded, max.	200 m
Analog value generation
Integration and conversion time/resolution per channel
Resolution (incl. overrange)	S7 representation: 0 to 20 mA, 4 to 20 mA; S5 representation: 12 bits, 12 bits
Resolution with overrange (bit including sign), max.	12 bit
Conversion time (per channel)	5 ms
Settling time
for resistive load	0.1 ms
for inductive load	0.5 ms
Errors/accuracies
Linearity error (relative to output range), (+/-)	0.06 %
Temperature error (relative to output range), (+/-)	0.01 %/K
Repeat accuracy in steady state at 25 °C (relative to output area), (+/-)	0.1 %
Operational error limit in overall temperature range
Current, relative to output area, (+/-)	1 %
Basic error limit (operational limit at 25 °C)
Current, relative to output area, (+/-)	0.7 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
Common mode interference (UCM < Vss AC (50 Hz)), min.	30 dB
Interrupts/diagnostics/status information
Substitute values connectable	No
Alarms
Alarms	No
Diagnostic alarm	No
Galvanic isolation
Galvanic isolation analog outputs
between the channels and the backplane bus	No; Optocoupler
between the channels and the power supply of the electronics	No
Permissible potential difference
between reference point of load and QV-(UCM)	2 V DC / 2 Vpp AC
Isolation
Isolation tested with	1500 V AC
Dimensions
Width	20 mm
Height	64 mm
Depth	51 mm
Weights
Weight, approx.	25 g
Status	Jul 7, 2014