| Product type designation |
RUGGEDCOM RX1100P |
| Product description |
Advanced Cyber Security Appliance |
|
THE RUGGEDROUTER RX1100P IS AN INDUSTRIALLY HARDENED, POWER OVER ETHERNET (POE) ENABLED, CYBER SECURITY APPLIAN WITH INTEGRATED ROUTER, FIREWAL AND VPN FUNCTIONALITY. PHYSICAL PORTS ETHERNET OPTIONS (UP TO 4 PORTS 10/100BASETX, 100BASEFX CELLULAR MODEM WAN PORT OPTIONS (UP TO 8 PORTS T1/E1, G.703, PPPOE/BRIDGED ETHERNET VIA ADSL T3 DS3, 56 KBPS DDS SERIAL PORTS (UP TO 8 PORTS): FULLY COMPLIANT EIA/TIA RS485, RS422, RS232 SERIAL PORTS EMBEDDED MODEM PORT PRECISION TIME PROTOCOL |
| Transmission rate |
| Transfer rate |
10 Mbit/s, 100 Mbit/s |
| Interfaces |
| Number of electrical/optical connections |
|
| ● for network components or terminal equipment / maximum |
4 |
| ● for network components or terminal equipment / maximum / Note |
Ethernet Options (up to 4 ports) |
| Number of electrical connections |
|
| ● for network components or terminal equipment / maximum |
4 |
| ● for serial interfaces / acc. to RS 232/RS 422/RS 485 / maximum |
8 |
| ● for operator console |
1 |
| ● for management purposes |
0 |
| Design of the electrical connection |
|
| ● for operator console |
RJ45 |
| ● for power supply and signaling contact |
10-pole terminal block, screwable or plugable, screw contact |
| Number of optical interfaces |
|
| ● for network components or terminal equipment / maximum |
2 |
| Range / at the optical interface / depending on the optical fiber used |
2 ... 90 km |
| Signal-Inputs/outputs |
| Relay design |
Form-C contact relay (SP CO) |
| Type of relay output |
Changeover contact |
| Operating current / of the signaling contacts |
|
| ● for DC / at 30 V / maximum |
1 A |
| Supply voltage, current consumption, power loss |
| product options / wide range power supply |
Yes |
| Product component / Power supply for PoE |
Yes |
| Product property |
|
| ● Voltage supply for PoE from the internal 48 V supply |
Yes |
| Supply voltage / 1 / Rated value |
24 V |
| ● Supply voltage / 1 / Rated value |
9 ... 36 V |
| ● Type of voltage / 1 / of the supply voltage |
DC |
| Supply voltage / 2 / Rated value |
48 V |
| ● Supply voltage / 2 / Rated value |
36 ... 59 V |
| ● Type of voltage / 2 / of the supply voltage |
DC |
| Supply voltage / 3 / Rated value |
|
| ● Supply voltage / 3 / Rated value |
88 ... 300 V |
| ● Type of voltage / 3 / of the supply voltage |
DC |
| Supply voltage / 4 / Rated value |
|
| ● Supply voltage / 4 / Rated value / minimum |
85 V |
| ● Supply voltage / 4 / Rated value / maximum |
264 V |
| ● Type of voltage / 4 / of the supply voltage |
AC |
| Active power loss |
|
| ● maximum |
25 W |
| Permitted ambient conditions |
| Ambient temperature |
|
| ● during operation |
-40 ... +85 °C |
| ● Note |
A maximum operating temperature of +85 °C is permissible for a duration of 16 hours |
| Operating condition / fanless operation |
Yes |
| Coating |
Conformal Coating optional |
| Protection class IP |
IP40 |
| Design, dimensions and weight |
| Design |
19" rack |
| Number of height units / relating to 19-inch cabinet |
1 |
| Number of slots |
6 |
| Width |
436.88 mm |
| Height |
44 mm |
| Depth |
302.26 mm |
| Net weight |
4.5 kg |
| Material / of the enclosure |
18 AWG galvanized steel enclosure |
| Mounting type |
|
| ● 19-inch installation |
Yes |
| ● 35 mm DIN rail mounting |
Yes |
| ● wall mounting |
Yes |
| Product properties, functions, components / general |
| Product function |
|
| ● Transmission of serial data via IP-Networks |
Yes |
| ● RAW socket mode for any serial protocols |
Yes |
| ● RS 232/RS 422/RS 485 ports with software selectable |
Yes |
| Protocol / is supported / Generic Object Oriented Substation Events (GOOSE) |
Yes |
| Product functions / management, configuration |
| Product function |
|
| ● CLI |
Yes |
| ● web-based management |
Yes |
| ● MIB support |
No |
| ● RMON |
No |
| ● switch-managed |
Yes |
| Protocol / is supported |
|
| ● Telnet |
No |
| ● HTTP |
Yes |
| ● HTTPS |
No |
| ● TFTP |
Yes |
| ● IGMP (snooping/querier) |
No |
| Protocol / is supported |
|
| ● SNMP v1 |
No |
| ● SNMP v2 |
Yes |
| ● SNMP v3 |
Yes |
| Product functions / Diagnosis |
| Product function |
|
| ● loopback diagnostics |
No |
| Product functions / VLAN |
| Protocol / is supported / GVRP |
No |
| Product functions / DHCP |
| Product function |
|
| ● DHCP client |
Yes |
| ● DHCP Option 82 |
Yes |
| ● DHCP Option 66 |
No |
| ● DHCP Option 67 |
No |
| Product functions / Routing |
| Product function |
|
| ● dynamic IP routing |
Yes |
| Protocol / is supported |
|
| ● RIP v1 |
Yes |
| ● OSPFv2 |
Yes |
| ● VRRP |
Yes |
| ● BGP |
Yes |
| ● PPoE via DSL |
Yes |
| Product functions / Redundancy |
| Product function |
|
| ● redundancy procedure STP |
Yes |
| ● redundancy procedure RSTP |
Yes |
| ● redundancy procedure MSTP |
Yes |
| ● eRSTP |
Yes |
| Protocol / is supported |
|
| ● STP |
Yes |
| ● RSTP |
Yes |
| ● MSTP |
Yes |
| Product functions / Security |
| Product function |
|
| ● IEEE 802.1x (radius) |
No |
| Protocol / is supported |
|
| ● SSL |
No |
| Product functions / Time |
| Protocol / is supported |
|
| ● NTP |
Yes |
| Standards, specifications, approvals |
| Standard |
|
| ● for EMC |
FCC Part 15 (Class A) |
| ● for safety / from CSA and UL |
cCSAus CSA C22.2 No. 60950, UL 60950 |
| Laser protection class |
Complies with 21 CFR Chapter1, Subchapter J |
| Certificate of suitability |
|
| ● CE marking |
Yes |
| ● IEC 61850-3 |
Yes |
| product conformity |
|
| ● acc. to IEEE 802.3-10BaseT |
Yes |
| ● acc. to IEEE 802.3u-100BaseTX |
Yes |
| ● acc. to IEEE 802.3u-100BaseFX |
Yes |
| ● RFC768-UDP |
Yes |
| ● RFC783-TFTP |
Yes |
| ● RFC791-IP |
Yes |
| ● RFC792-ICMP |
Yes |
| ● RFC793-TCP |
Yes |
| ● RFC826-ARP |
Yes |
| ● RFC854-Telnet |
Yes |
| ● RFC1294-Frame Relay |
Yes |
| ● RFC1305-NTP |
Yes |
| ● RFC1321-PPP (MD5) |
Yes |
| ● RFC1332-PPP (IPCP) |
Yes |
| ● RFC1334-PPP Authentication |
Yes |
| ● RFC1490-Frame Relay |
Yes |
| ● RFC1519-CIDR |
Yes |
| ● RFC1541-DHCP (client) |
Yes |
| ● RFC1661-PPP |
Yes |
| ● RFC2068-HTTP |
Yes |
| ● RFC2338-VRRP |
Yes |
| ● RFC2475-Differentiated Service |
Yes |
| Further Information / Internet Links |
| Internet-Link |
|
| ● to website: Industry Mall/RUGGEDCOM selector |
http://ruggedcom-selector.automation.siemens.com |
| ● to website: Siemens RUGGEDCOM |
http://siemens.com/ruggedcom |
| ● to website: Selector for cables and connectors |
http://www.siemens.com/snst |
| ● to website: Industrial communication |
http://www.siemens.com/simatic-net |
| ● to website: Industry Mall |
https://mall.industry.siemens.com |
| ● to website: Information and Download Center |
http://www.siemens.com/automation/net/catalog |
| ● to website: Image database |
http://automation.siemens.com/bilddb |
| ● to website: CAx Download Manager |
http://www.siemens.com/cax |
| ● to website: Industry Online Support |
http://support.automation.siemens.com |
| Security information |
| Security information |
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) |
| last modified: |
15.12.2014 |
Date
06.01.2015 |
Changes preserved
© Copyright Siemens AG 2015 |
